estimated
target price of 1.5 million won.
- Analysis of materials.
the two kinds of material items were calculated based on years of
experience, First of all, the case of manufactured goods was
investigated around the center of the big stores in terms of cost where
to buy items and In the case of non-manufactured go
1. The accountants’ estimates in Exhibit 2 use the “most likely” sales projection in Exhibit 1 for each year. Is this appropriate? Explain.
In Exhibit 1, there are three probability of annual sales; 1,350,000lbs whose probability is 0.1, 1,650,000lbs whose probability is 0.6 and 2,250,000lbs whose probability is 0.3. Among three cases, the accountants use 1,650,000lbs, which is the “mo
□ Traditional approach to Industrial location (공업지역에 대한 전통적 접근방식)
▶ focused on the proximity of raw materials and markets,
mainly with a view to minimizing transportation cost
(운송비 최소화의 관점에서 원자재와 시장에 대한 접근성에 관심)
□ The integrated feasibility study (통합 타당성 검토)
▶ Technically feasible (기술
3D printing
3D printing or additive manufacturing (AM) refers to any of the various processes for printing a three-dimensional object. Primarily additive processes are used, in which successive layers of material are laid down under computer control. These objects can be of almost any shape or geometry, and are produced from a 3D model or other electronic data source.
Basic principles
If the
Economical requirement
1)Check the prices of pump and fittings, etc.
2)Set the elbow at the minimum
3)Choose suitable pipe considering pressure drop and prices.
4)Pressure drop and flow rate should be considered for deciding pump
5)Make a budget by adding up all the prices above