2. Objective
1) To investigate of solid-liquid mixture flow characteristics in a slim hole annulus
2) Effect of pipe rotation, fluid property, annulus inclination on the particle transport velocity, transport efficiency and pressure drop
3. Theoretical background
3.1 Reynolds number
Reynolds number can be defined for a number of different situations where a fluid is in relativ
조작선의 평형선의 아래에 위치하는 증류의 경우와 반대로 흡수조작의 경우에는 조작선이 평형선 위에 위치한다. 흡수는 불용성 기체와 섞여 있는 가용성 기체가 V상으로부터 L상으로 전달되는 경우로서 조작선은 그림 1-2의 (b)와 같이 평형선 위에 놓여 있어야 한다. 이 경우 물질전달의 구동력은 yn+1-y
stream의 정보는 다음과 같다.
VAP1 stream
mass flow[kg/hr]
mole fraction
WATER
39392.7394
0.77417305
ETHANOL
29260.7275
0.22487379
CO2
118.481529
0.00095315
표 8. VAP1 stream
2) Separation Model
foolish model 이후 순수한 ethanol을 얻기 위한 separtion공정이다.
① D1 unit (distillation)
원할한 azeotropic distillation을 하기 위하여 별
+ Why Hulu bring out
(Ad-Supported)
Subscription Model?
The Pressure From
Holding Companys
(Contents Owners)
+ PC and Mac computers with Flash
+ Apple iPhone & iPod touch (running iOS4)
Apple iPad (3G and wifi)
+ Internet TVs and Blu-ray players
+ Sony PS3 & Microsoft Xbox 360
+ 온라인 비디오 시장의 43%, 140억 개 이상의 비디오
+ 매 분 35시간에 해
최근 대용량의 하드디스크 공간과 빠른 회선속도를 제공함으로써 CP(Contents Provider)들이 고품질의 인터넷 방송 컨텐츠를 서비스할 수 있도록 인프라를 제공하는 웹캐스팅 전문 IDC(Internet Data Center)가 설립 러시를 이루고 있고, 이들 사업은 정보통신산업의 부가가치 중 30% 이상을 보장받고 있다.
2.2 각각의 받음각에 대한 압력계수와 플롯
2.2.1 각각의 받음각에 대한 압력계수
위에서 구한 각 압력 탭의 압력을 이용하여, 압력계수를 구하였다. 압력계수의 식은 아래와 같다
* (P = 각 Tap 에서의 측정압력, = free stream의 압력, = 동압)
이때 동압은 식에 의해 전압(24번 압력탭) -
stream water clean. The facility, which has a capacity of 32000t/day, was installed to clean the upstream water to improve the water quality in Yangjae stream. Due to the system, the water quality improved from level 5 to level 2~3 and this plays an important role in restoring the ecosystem.
Secondly, vegetation revetment technique was used to make close-to-nature river bank. Concrete was remov
10) Spec에서 Reflux Ratio를 선택해서 View를 클릭한다. 그리고 Close 클릭한다.
11) Spec에서 Column Specifications Group 안에 있는 Add 버튼을 클릭하고, Component Recovery를 선택한 뒤 Add Spec을 클릭한다. 아래쪽의 그림과 같이 입력시킨다.
12) Close를 클릭한다.
13) Spec에서 Column Specifications Group 안에 있는 Add
그래프를 보면 airfoil이 위치한쪽에 속도가 낮아진 것을 볼수 있고, 이는 airfoil의 drag force로 인한 momentum defect가 나타난 것이다. 또, 끝부분 ±60mm부근에서 속도가 줄어드는 경향을 보이는데 이는 airfoil외에도 실험장치 내부 벽면에서도 drag force가 발생함을 보여준다. 실험할때±60mm부분도 내부 벽면에서