Flocculation Basins)
플록형성지의 설계착수에서 가장 먼저 플록형성지의 형태를 결정해야 한다. 이를 위해 가장 중요한 인자는 원수의 탁도와 처리수량의 변화이다. 원수의 탁도가 높고 처리수량 변화가 큰 경우 기계적 플록형성방법을 채택하는 것이 좋고, 비교적 수질과 수량이 일정한 경우 수리학적
Ⅲ Flocculation
The purpose of flocculation is to uniformly mix coagulated water to produce either settleable or filterable floc and accelerate the rate of particle collisions, causing the agglomeration of electrolytically destabilized colloidal particles into settleable and filterable sizes.
Considerations of flocculation are:
1. Baffling to prevent of flow short-circuiting
2. Tapered
basin.
Wastewater Flows through as a plug & is treated as it winds its way through the tank.
As the wastewater goes through the system, BOD and organics concentration are greatly reduced.
Variations to this method include: adding return sludge and/or in decreasing amounts at various locations along length of the tank; wastewater BOD is reduced as it passes through tank, and air requirements
제1절. 연구의 필요성 및 목적
석유화학공단에서 발생되는 석유화학 폐수는 수십 종의 휘발 및 반 휘발성 유기화합물과 독성물질을 함유하고 있어 심각한 환경 문제를 일으키는 원인이 되고 있다.
이번 연구를 시행함에 있어서 롤 모델로(Roll Model) 선정한 울산석유화학 공단은 우리나라 석유화학산
Process Selection Considerations
Selection of an activated-sludge process for BOD removal and nitrification is a function of many considerations including specific site constraints, compatibility with the existing process, compatibility with existing equipment, present and future treatment needs, level of capability of the operating staff, capital costs, and operating cost.
Complete-mix activ