높아지는것을 ECU에 공급한다. ECU에서는 자동차의 고도를 계산한 후 연료의 분사 량과 점화시기를 조절한다. 자동차가 고지에 도달한 것으로 판정되면 혼합기가 희박해지므로 컴퓨터는 연료의 분사량을 조절하여 적절한공연비가 되도록 하고 동시에 점화시기도 조절하여 준다.
3. Liquid level
1. Justifications of the proposed schemes -the structural problem& the chemical injection locations
2. Design impeller and tank type affecting energy efficiency, cost, flocculation size. Design Diffuser Walls and Baffles used for Minimizing Short Circuiting
3. Design launder type, structure, sludge and scum model
Filtration의 세번째 key concept 이유: (to promote readily biodegradabl
침전시켜야함을 인지하고 참고논문을 이용하여 STM(Sedimentation Time Modeling)을 유도하였다. 이러한 결과들을 종합하여 CMP 폐수의 유입부터 Microfiltration, Electrocoagulation 및 Sedimentation, 마지막으로 최종 pure water까지 공정을 설계하고 실제 산업에 적용 가능하도록 전반적인 Flow Diagram을 이끌어 낼 수 있었다.
Ⅲ Flocculation
The purpose of flocculation is to uniformly mix coagulated water to produce either settleable or filterable floc and accelerate the rate of particle collisions, causing the agglomeration of electrolytically destabilized colloidal particles into settleable and filterable sizes.
Considerations of flocculation are:
1. Baffling to prevent of flow short-circuiting
2. Tapered