Tensile Strength
Indicated by the maxima of a stress-strain curve and,
in general, indicates when necking will occur.
Tensile strength obtained from tests of the double
axial loads P notation refers to the value
calculated by dividing .
ShearStrength
-An intersecting point of th
strength, UTS)까지 힘을 받지 않아도 파괴되어 버리는 Fatigue 현상이 있다.
<그림 1> Mechanical Bonding Test1. Mechanical Bonding Test
기계적 강도 측정법(Mechanical Bonding Test)에는 크게 두 가지가 있는데 <그림 2>와 같이 ShearTest와 Pull Test가 있다. 현재 가장 흔히 쓰이는 방법은 ShearTest로 Solder를 PCB 기판에 접합 후
of graph through regression analysis)-회귀분석을 통한 그래프 평균화
(Finding 'a' with using shrinkage equation)
3. Finding 'a'=66.39
■ Result discussion
Because we used a broken gage, we're choosing remains of 2 gages.
The greatest error in shrinkage test was that we couldn't get a expected strain; because we had a mistake not exactly attaching gages.
2.8 Creep
strength)이므로 실제 인장강도보다 10%~15% 높게 나온다. 따라서 우리는 실험값에 0.9를 곱하여 보다 정확한 수치를 구했다. 그렇게 나온 값은 모두 이론값의 범위에 포함되며 큰 오차는 없었다.
3. 전단강도 실험은 매우 까다로울 뿐만아니라 실험값도 정확히 나오지 않기 때문에 실험으로 얻은 압축강도