1. 용접의 개념
금속과 금속을 충분히 접근시키면 이들 사이에는 뉴튼의 만유인력에 따라 금속 원자간에 인력이 작용하여 서로 결합하게 된다. 이 결합을 이루려면 원자들을 10nm정도 접근시켜야 하는데 이와 같은 일은 평상시에는 일어나지 않는다. 그 이유는 보통조건에서는 금속표면에 산화막이 존
Overview
The printer that is widely used is 2D printer. 2D printer is operated with papers and ink. It can print the letters, shapes and colored pictures on the paper. However, 3D printer can make 3D structure with ink like polymer. 3D printers make the product with not the top-down method but the bottom-up method. The most useful advantage of 3D printer is that it is the more useful device wh
실험. 소결(Sintering)
1. 실험 목적
소결 공정 중, 온도가 소결체의 특성에 미치는 영향에 대해 알아본다.
2. 관련 이론
①소결의 기초
소결은 접촉해 있는 입자들을 고온에서 서로 결합하게 한다. 이는 융점 아래에서 고체 상태의 원자간 이동현상에 의해 일어난다. 그러나 많은 경우에 액상의 형
Keff, Km, Kp : the effective thermal conductivities of the composite,
Metal matrix, Particles
φp : the volume fraction of reinforcements
a : the diameter of the reinforcement
- hc : the boundary conductivity.
Advantage
The air travels across the short
length of the fins laterally, rather than longitudinally down
the long length.
Focused on placing