1. 인장시험의 목적
인장시험은 재료에 인장하중이 가해졌을 때 변형량이 얼마나 되는 가를 측정하여 재료의 변형에 대한 저항의 정도를 측정하는 것이다. 인장시험을 통해서 얻을 수 있는 재료의 기계적 성질은 탄성변형에 대한 저항력인 종 탄성계수(Elastic Modulus)와 항복강도(Yield Strength), 소성변형
2.7 Shrinkage
- Theoretical value: (a=35, : Maximum Shrinkage Strain Ratio)
- The process of finding 'a'
1. Arranging excel data
2. Finding 'a' with using a grapher program
(Converting Excel data into graph shape)
(Standardization of graph through regression analysis)-회귀분석을 통한 그래프 평균화
(Finding 'a' with using shrinkage equation)
3. Finding 'a'
-Conclusion & Discussion
Poisson's ratio is derived by dividing the horizontal strain modulus by perpendicular strain modulus. Poisson's ratio is a characteristic value of materials, and concretes have 0.16∼0.22 of it. The Poisson's ratio from the first experiment is 0.18 and this is comprised in the range of theory, and the value from the second experiment is 0.16 which also comes under th
1. 응력-변형률 선도(Stress-straincurve)
응력-변형률 선도란?
응력-변형률 선도란 재료의 시편에 가한 하중과 변형을 측정하여 얻은 그래프이다. 재료마다 다른 응력-변형률 선도를 보인다. 공학에서는 재료 시편의 초기 치수로 계산한 “공칭 응력 (σ)”과 “공칭변형도(ε)”를 사용하며, 시험 매 순간
Tensile Strength
Indicated by the maxima of a stress-straincurve and,
in general, indicates when necking will occur.
Tensile strength obtained from tests of the double
axial loads P notation refers to the value
calculated by dividing .
Shear Strength
-An intersecting point of th