torsion)등의 여러 가지 힘을 받는다. 그리고 크랭크축의 크랭크 저널 중에서 기관 중앙부에 있는 저널은 크랭크 앞쪽 또는 뒤쪽의 저널보다 큰 압력을 받게 된다.
크랭크 핀 2개에 대하여 1개의 저널을 가진 경우에 저널의 지름을 구하여 보기로 한다. 실린더의 지름 (), 저널의 지름 (), 저널의 폭 =1.3(),
mode and effect analysis): FMEA의 목표는 FSI의 고장원인과 그에 따른 영향을 파악하는 것이다
(3) RCM 논리 결정. 각 FSI들의 고장원인은 RCM 논리경정 차트에 의해 결정된다. 특정 예방보전 정책과 정책의 기간은 신뢰도 자료에 의해 규명된다.
(4) 예방보전 정책의 결합과 보전 프로그램의 개발. 개별 정책기간
General Process of 3D printing
FDM - Fused Deposition Molding
FDM works on an "additive" principle by laying down material in layers.
The model is produced by extruding small beads of thermoplastic material to form layers as the material hardens immediately after extrusion from the nozzle.
The nozzle can be moved in both horizontal and vertical directions by a numerically controlled mechanism
3D printing
3D printing or additive manufacturing (AM) refers to any of the various processes for printing a three-dimensional object. Primarily additive processes are used, in which successive layers of material are laid down under computer control. These objects can be of almost any shape or geometry, and are produced from a 3D model or other electronic data source.
Basic principles
If the
1. 탄성과 소성
1) 탄성
재료에 하중을 가했다가 제거할 때 원래의 치수로 돌아가는 재료의 성질을 탄성(elasticity)이라고 하고 그 재료는 탄성을 갖는다고 한다. 탄성은 복원력의 결과로서 안정된 상태(물질)의 특성이다. 즉, ro 를 평형상태의 크기(길이), x(≡ r-ro) 를 늘어난(또는 줄어든) 길이라고