Sintering
An additive manufacturing technique that uses a laser as the power source to sinter powdered material (typically metal).
The laser selectively fuses powdered material by scanning cross-sections generated from a 3-D digital description of the part.
After each cross-section is scanned, the powder bed is lowered by one layer thickness, a new layer of material is applied on top, and the
Ⅰ. 서론
3D 프린팅(Printing)은 생산, 제조업 분야에서 주목을 받고 있는 기술이다. 기존의 종이에 글자를 인쇄하는 일반적인 프린터와는 다르게, 플라스틱과 같은 경화성 소재를 사용하여 3차원의 입체 모형을 출력해내는 인쇄기술을 말한다. 기계 공학 분야에서 필요한 부품이나 의학 분야에서 환자
한층 한층 쌓아가면서 프린팅을 한다.
SLS(Selective Laser Sintering) 방식
SLS방식은 분말 소결방식으로 분말로 된 재료를 레이저로 부분적으로 녹여 프린팅 하는 방식 이다. SLS는 다른 프린팅 방식과는 달리 금속까지 프린팅 할 수 있으며 고품질의 상품 제조에 바로 사용할 수 있다는 것이 특징이기도 하다.
3D printing
3D printing or additive manufacturing (AM) refers to any of the various processes for printing a three-dimensional object. Primarily additive processes are used, in which successive layers of material are laid down under computer control. These objects can be of almost any shape or geometry, and are produced from a 3D model or other electronic data source.
Basic principles
If the
Addition of silver nitrate during Au nanorod growth from penta-twinned seeds leads to an increase in the gold nanorod yield and greatly improves control over the aspect ratio. Contrary to the results obtained with citrate-capped Au nanoparticle seeds, when CTAB is used during borohydride reduction of HAuCl4, single crystalline seeds are obtained, which are also smaller in size. One important piec