3. 냉각판의 설계와 해석 결과
Consider a cold plate fabricated from aluminum(k=190W/mK) with regularly spaced rectangular channels through which the water is passed.
Assume the top surface of the cold plate to be insulated. System reliability considerations dictate that the maximum cold plate temperature must not exceed 40℃.
(a) Determine h and calculate the pumping power.
coefficient d12 와 F1에 의한 station 2의 influence coefficient d21 이 같게 된다. 실험 결과는 다음과 같다.
그래프를 보면 알 수 있듯이 두 station 의 응답이 정확히 일치하지 않음을 알 수 있다. 이에 대한 원인은 다음과 같다.
① 선형 시스템의 가정
Maxwell의 상반 정리는 모든 linear system 에 대해 적용이 가
A Light emitting diode (LED) is essentially a p-n junction diode. When carriers are injected across a forward-biased junction, it emits incoherent light. Most of the commercial LEDs are realized using a highly doped p-n Junction.
Mismatch between the sapphire substrate and the epilayer
Bending of the structure due to the thermal coefficient difference
Leakage by the strong electric current
Pr
Partial substitution of Ba by a smaller M2+ ion
unit cell volume decreases and the phase transition temperature decreases
An insulator at room temperature becomes semiconductive after doping
trivalent donars (e.g. La, Sb, Y) substitute for the Ba2+
pentavalent donars (e.g. Sb, Nb, Ta) substitute for Ti4+.
와인 보관 창고
적정온도 : 7-13도
더 낮은
coefficient which explains domestic income inequalities was 0.292 during 1975~1995. In accordance. With the high economic growth and relatively narrow income inequalities, the poverty rate has drastically fallen from 20.04% in 1975 to 7.36% in 1995. Moreover the average unemployment rate was 3.16% during 1980~1997, markedly lower than those of OECD countries. Accordingly, the economic development
투수에 대한 중요성
물속에서 물의흐름 :
간극끼리 서로 연결되어있어 높은 곳에서 낮은 곳으로 흐름
침투력으로 인해 안정성에 영향을 미친다
공극수압의 소산
흙, 암석 내 공극을 채운 물
(공극수)에 작용하는 압력.
하중이 가해지면 정수압보다 큰
수압이 생기고 공극수가 유동함으
coefficient) : 상관관계의 크기는 나타내며, –1부터 +1 사이의 값을 갖고 두 변수의 상관관계가 正 혹은 負의 방향으로 클수록 +1 또는 –1에 가깝게 나타나고 두 변수간에 상관관계가 전혀 없으면 상관관계계수는 0이다.
상관관계계수의 계산과 유의성 검증 : Pearson 상관관계계수(Pearson product-moment cor
coefficient)에 대하여 설명하고자 한다. 이 때 두 변수는 크기가 측정되는 수량변수(metric variable),즉 질적변수가 아닌 양적 변수이어야 한다.
2) 연관성의 방향
변수 사이의 연관성은 방향을 갖게 된다. 즉 한 변수의 값이 커질 때 다른 변수의 값도 커지면 두 변수는 양의 연관성이 있다고 하며,
we pull the body down a certain distance and then release it, it undergoes a motion. We assume that the body moves strictly vertically.
We want to determine the motion of our mechanical system. For this purpose we consider the forces acting on the body during the motion. This will lead to a differential equation, whose solution will give the displacement of the mass as a function of time .