thermal(1) and photonic(2).
√ What is Infra-red radiation?
▶ long wave length (0.75㎛ ~ 1000 ㎛)
▶ invisible to human eyes
▶ small energy
▶ emitted from all kinds of objects
▶ Broad intrinsic layer between P-N junction.
▶ High resistivity in I-region by low carrier
concentration
▶ Reverse bias make i-region fully depleted
▶ Photovoltaic effect
resistance at high temperatures, high-temperature
membrane and separation processes, heat exchangers, and heat storage media. Design aspects and safety are also important for high-temperature processes.
-Thermo-chemical water splitting
For example, Thermo-chemical water splitting is the conversion of water into hydrogen and oxygen by a series of thermally driven chemical reactions. Thermo-
resist)를 형성하고 500/50 um 비율로 마스크를 웨이퍼에 대고 노광을 해서 음각으로 PR층을 제거하여 패턴을 형성한다.
Magnetron sputter 장치를 이용해 시편에 Al을 증착한 후에 패턴 형성부를 제외한 나머지 부분에 존재하는 PR층 및 Al 층을 제거한다.
SPA를 사용하여 열처리 전의 ID-VD, ID-VG, Mobility를 측정한
top layer
A. use to thermal pressing machine for coating
Reliability of the methods
Our product processing techniques are based on exiting patent:
Fig2. ‘Anti - insect wall paper’
4. Processing
1. Functional substance(Adhesive) manufacturing
Fig3. Anti-insect adhesive manufacturing process
1) Copolymerization of vinyl acetate and Butyl acrylate
thermal evaporator, and chemical composition of the thin film was analyzed nearly as the proportion of 1 : 1 : 2.
Physical properties of the thin film were investigated at various fabrication conditions substrate temperature, annealing and temperature, annealing time by XRD, FE-SEM and hall measurement system.
At the same time, carrier concentration, hall mobility and resistivity of the thin f
mobile phase로 이용되는 gas로, 유해하면 안 되기 때문에 inert하며, sample과 반응하면 안되기 때문에 unreactive하다. 대표적으로 He, Ar 같은 비활성기체나 H2, N2 등의 비극성 경량 기체가 많이 이용되며, TCD를 사용하는 경우는 thermal conductivity를 고려하여 좀 더 엄밀한 기준 하에 carrier gas를 고르게 된다.
thermal energy of kT.
At relatively high temperature, a nonradiative relaxation process
the transition probability per unit time, N :
By letting W by the luminescence probability, the luminescence efficiency h can by expressed as:
Incompletely filled 4 f shell
4 f orbital shielded from surroundings by the filled 5s2 &5p6 orbital
small influence of the host lattice
resistance. Therefore, present study has been aimed to develope these kinds of materials. Here are two ways to develope the composite or dissimilar material.
1. 서 론
기계, 구조물의 파괴, 파단은 동종 또는 이종재료가 접합부의 강도저하로 발생하는 경우가 많아지면서, 최근 여러 산업분야에서 이종재료 접합에 대한 기술개발과 접합부
실 험 이 론
2. 전도(Conduction)
물질의 이동을 수반하지 않고 열에너지가 고온부에서
저온부로 이동하는 현상을 전도라고 한다. 이 과정은
결론적으로 내부에너지를 교환하는 과정이라고 보면 된다.
Solid : 고체의 경우 격자 안의 자유전자에 의한 분자진동에 의해서 전도가 일어난다
Liquid & G