3. Experiment & Procedure
3-1 Reagent
- Water, 수돗물(15℃)
3-2 Apparatus
- single media deep bed filter column
- manometer
- mass cylinder
- thermometer
- stopwatch
3-3 Procedure
1) 실험에 사용할 여재(모래)를 준비한다.(세척 및 이물질 분리)
2) 모래를 건조시킨 후, 체 거름을 이용하여 입자 크기를 잰다.
3) 공극률(P
2) 여과의 원리
최근의 정수처리장에서 볼 수 있는 바와 같이 여과는 응집이나 연화된후, 침강에 의해서 제거되지 않는 작은 플럭이나 침전입자들을 제거하기 위한 마감재로 가장많이 사용되는 방법이다. 용수처리에서 사용되는 여과상 사이의 기본적 차이점은 메디아의 크기에 있다.
폐수처리의
않는다. (고정층) 그리고 이 때의 압력강하 Ergun 방정식에서 구할 수 있다.
where fp and Grp are defined as
and
where: Δp is the pressure drop across the bed, (압력강하)L is the length of the bed (not the column), (비드의 길이)Dp is the equivalent spherical diameter of the packing, (충진물의 직경)ρ is the density of fluid, (유체의 밀도)
Bed
② measure the pressure drop of fixed bed and fluidized bed and understand relation between pressure drop and flow condition of fluid.
③ Experimental fluid properties of fluidized Bed and understand mutual relation between variables that play an important role in fluidization.
2. 이론
① 항력과 항력계수
(ⅰ)항력(Drag Force) :고체 충진층을 통과하는 유체
실험은 유체인 물로 고체입자를 펌핑시켜 형성된 유동층의 높이와 압력강하 및 유량속도를 측정하고 고정층과 유동층의 흐름현상을 관찰해 본다.
2. 실험 이론
2.1 고정층 (fixed bed)
① 정의 : 유체의 속도를 증가시키면 고체입자는 움직이지 않아 입자 층의 높이는 변하지 않고 압력강하는 조금 더