실험 방법
시편에 JIG가 놓여질 위치, Load Applicator가 누르게 될 위치에 금긋기를 한다.
시험기에 받침대를 올려놓고, 받침대 사이의 거리를 규정대로 맞춘다.
Load Applicator를 장치한다.
시편을 장착하고 Load Applicator를 댄다.
받침대와 Load Applicator가 서로 평행한지를 조사한다.
Test Condition을 정
lengths of several decade microns. The high-magnification images of single ZnO nanostructure in Fig. 1(d) and (e) reveal that they are composed of central axial nanowires surrounded by radially oriented nanorods with 6-fold structural symmetry. Fig. 1(f) shows the side-wall image of hierarchical ZnO nanostructure with widths of 70–-120 nm and average length of around 600 nm. The high-magnif
1-2. NACA0012 Airfoil의 형상과 압력탭의 좌표값
* 형상
『NACA0012』는 Airfoil의 형상을 NACA 4digit라는 표기 형식으로서 나타낸 것이다. NACA 4digit는 4개의 숫자를 이용해서 Airfoil의 형태를 정의하게 된다.
4가지 숫자 중 가장 처음에 오는 숫자는 시위 길이(Chord length)에 대한 Maximum Camber의 길이 비율을 나타낸
length or characteristic dimension. This dimension is a matter of convention - for example a radius or diameter are equally valid for spheres or circles, but one is chosen by convention. For aircraft or ships, the length or width can be used. For flow in a pipe or a sphere moving in a fluid the internal diameter is generally used today. Other shapes (such as rectangular pipes or non-spherical obj
때, = 17.5369 (m/s)
▸ AOA=3 일 때, = 17.3046 (m/s)
▸ AOA=-3 일 때 , = 17.3046 (m/s)
➃ 특성길이(characteristic length)
특성길이는 에어포일의 길이이므로, 위의 L값에는 익형의 길이인 를 대입한다.
지금까지 구한 각각의 값들을 다음의레이놀즈식에 대입해 구해보면 다음과 같다.
Re =