Compressive Test)
압축시험은 재료가 압축력을 받을 경우 어느 정도 저항력을 나타내는 가를 측정하는 시험이며 압축력에 대한 재료의 저항력을 알아야 하는 경우도 매우 다양하다. 즉 구조물 등의 설계뿐만이 아니라 기계 및 금속의 가공 등에 서도 압연, 단조 등 많은 공정이 압축력을 받는 상태에서 수
Ⅰ. INTRODUCTION
In fourth semester most of our department students attend the subject of mechanical manufacturing practice and we have made a bolt by ourselves. But the process was not a soft job. A bolt and nut is used diversely but it seemed that we don't know much about a importance and manufacture of bolts.
A bolt is a threaded fastener used inindustry to make two or more mechanical
암은 우리나라에서 첫 번째로 흔한 사망원인이며, 환경공해와 스트레스 증가 등 여러 가지 요인으로 인해 암 발생률 또한 해마다 증가하는 추세이다. 암을 진단받은 대상자의 두려움이 5D, 즉 죽음(Death), 기형(Disfigurement), 불구(Disability), 의존성(Dependence), 대인관계의 어려움(Disruption of relationship)으로 표
Fracture
Static Loading
Brittle, Ductile, Creep Rupture
Fatigue(Dynamic Loading)
A degradation of mechanical properties leading to failure
of a material or a component under cyclic loading
High/Low cycle, Fatigue crack growth
Classification of failures according to cause
77% of failures are
generally caused
directly or indirectly
by fatigue
Process of fatigue fracture
The
순환하는 한 계속되며 균열은 최대 인장응력의 수직방향을 따라서 성장한다.
균열전파 성장률은 매우 작아서 매 사이클당 〖10〗^(-8)에서 〖10〗^(-4)in 이지만 매우 많은 사이클을 통해 성장해간다.
Fig. 2 알루미늄 합금의 균열표면에서 피로 줄무늬
Fig. 3 피로파괴 모식도