NOTAR(NO Tail Rotor)
Antitorque by using airflow
More expensive but less noise
Coaxial Helicopter (concentric or located along the same axis)
Coaxial Helicopter use Two shafts.
Each shaft rotate opposite direction.
→anti-torque
High Useful Load but complicate rotor design
Problem 3.52
One of the tail rotor blade of a helicopter has an unbalanced mass if m = 0.5
1-3. 최적 압축비 이상으로 증가할 때 오히려 크랭크 축으로 전달되는 torque가 감소하는 이유 ?
압축비를 증가시킴으로써 엔진의 효율을 상승시킬 수 있다. 그러나 압축비를 무한정 높이지 못하는 원인들이 있는데 가솔린 엔진에서 압축비 제한의 가장 주요한 요인은 knocking이다.
연소가 일어날 때 화
Ⅰ. INTRODUCTION
In fourth semester most of our department students attend the subject of mechanical manufacturing practice and we have made a bolt by ourselves. But the process was not a soft job. A bolt and nut is used diversely but it seemed that we don't know much about a importance and manufacture of bolts.
A bolt is a threaded fastener used in industry to make two or more mechanical
이용하여 Torque값을 구한다.
F = m × a
= (0.5 × 1700kg) × (-8.972m/s2)
= -7626.5N
T = F × r
= -7626.5N × 0.334m = -2547.3Nm
ㆍ종감속기어를 통한 증속
증속비 = 3.737:1
Tc = 2547.3Nm ÷ 3.737 = 681.6Nm
EXEDY社의 습식다판클러치 카탈로그를 참고하여 부하를 견뎌낼 수 있는 클러치를 선정하였다.
1. 축에 작용하는 스러스트에 대한 해석
스러스트를 반영하면서 모멘트 선도를 그릴 때 에러가 발생했다. 결국 임의의 역 스러스트를 OHL가 작용하는 곳에 가하여 모멘트 선도를 0으로 수렴시켰다. 하지만 이 작용이 확실하게 맞는 것인지에 대한 의문이 남는다.
2.안전율의 차이
정적 해석과 피