High-strength steel 7.8 207 500 이상 132 0.35
Aluminum alloy 2.7 69 193 0.66 0.19
GFRP(chopped fiber, molding grade) 1.8 15 75 0.73 0.21
알루미늄 합금 또는 GFRP의 경우 아주 낮은 탄성계수를 가져서 주어진 하중 하에 아주 많이 휘게 된다. 그리고 GFRP는 너무 낮은 인장 강도를 가지며 소성의 흐름이 생긴다는 점에서 강철 패널을
the other hand, shortcoming is
1) withstand to Apchukryeok, force that press, but is weak in tensility, force that pull.
2) because weight is high than strength, weight of building is heavy.
This is repletion fairly by high-strength concrete and light weight concrete development, use.
3) expense that construction period (term of work) is prolonged and makes mold by use of mold much Deum .
High-Tech Textiles
1. Smart flame-resistant textile
1) 배경
IED(Improvised Explosive Deviced:급조폭발물)로 인한 사상자발생으로
화염방지의 필요성을 절감하였다.
2) Nomex®
듀퐁사에서 1960년대 초반에 개발한 Aromatic polyamid(aramid) fiber로 1967년부터 상업적으로 생산되기 시작. 지금은 화염방지 소재에 있어 하나의 명
초초고층 구조물의 등장 (500M∼4,000M)
현대사회는 도시집중화에 따른 인구 과밀화와 시설의 집중이 이루어지고 있으며, 이중 건설분야에 뚜렷이 나타나는 현상은 구조물의 초고층화, 대형화(장지간 교량, 극저온 탱크, 체육관) 그리고 특수화(해양, 지하공간 구조물, 원자력구조물 등) 경향이며 이에
What is a GSCM?
Integrating Environmental Thinking into Supply Chain Management, including
Product design
Material sourcing and selection
Manufacturing processes
Delivery of the final product to the customers
End-of-life management of the product after its useful life
Energy-saving facility investment tax deduction
Deduct 10% of corporate tax when local company invest in energy-sav
Table 1 표에서 보면 여러 가지 Glass, Oxides, Silicon carbide, Boron, Carbon 재료의 특성이 나타나 있다. 우선 strength 의 경우, 샤프트에 실리는 강한 힘을 견딜 수 있게 만들어야 하니까
Figure 1
강하면 좋다. 그리고 modulus도 값이 클수록 좋다. 이 값이 클수록 더 부드러운 샤프트가 될 것이고, 이값이 작고, strength
위와같이 잘 알려진 의료용 용도의 섬유 외에도 많은 의료 전반에 걸친 여러 분야에서 섬유고분자가 사용되고 있다. 의료용 고분자는 크게 필림상, 섬유상, 용액상, 수지상 등으로 많이 사용된다. 이중 섬유의 구조적인 특징은 넓은 표면적과 높은 강도를 가지는 특성 때문에 널리 사용된다. 섬유고분자
Aim
Reducing weights
High fuel efficiency
Low fuel consumption
Reduction total amount of CO2 gas
Structure of an automobile
Chassis
Mg-Zn-Zr alloy
Magnesium alloy + Zr
Grain refinement
Mg-Ce alloy
Precipitation Ce on GB at high temp.
High creep strength
Engine parts(Introduction)
Basic engine part
High engine weight ratio
Requir
최근 구조물의 고층화, 대형화 등 국내외의 건설환경이 변화함에 따라 콘크리트에 있어서도 고품질 특히 고강도화에 대한 요구가 점증하고 있다. 과거 수년동안 콘크리트와 관련된 대형사고로는 삼풍백화점 및 우암아파트 붕괴사고, 팔당대교와 신행주대교의 붕괴사고, 신도시 아파트의 부실 시공 등