tensile strength 혹은 ultimate strength)
항복이 일어난 후, 변형이 계속적으로 증가하면 이에 따라 비선형적으로 응력도 증가하게 된다. 이 응력은 최대응력까지 증가한 후 다시 감소하다가 재료는 파괴하게 된다. 이 때, 최대 응력을 인장강도라 한다.
3. 실험 장치
4. 인장 시험편
공
Tensile Strength
Indicated by the maxima of a stress-strain curve and,
in general, indicates when necking will occur.
Tensile strength obtained from tests of the double
axial loads P notation refers to the value
calculated by dividing .
Shear Strength
-An intersecting point of th
in the range of theory, and the value from the second experiment is 0.16 which also comes under the range of theory. In case of specimen no.1, there was an error of 12.6% but the Poisson's ratio is highly appropriate. From this, we can analogize the Poisson's ratio has nothing to do with strength, but is related to the materials.
4. Shear Modulus of Elasticity
‣ Theoretical Value
tensile strength, UTS)까지 힘을 받지 않아도 파괴되어 버리는 Fatigue 현상이 있다.
<그림 1> Mechanical Bonding Test1. Mechanical Bonding Test
기계적 강도 측정법(Mechanical Bonding Test)에는 크게 두 가지가 있는데 <그림 2>와 같이 Shear Test와 Pull Test가 있다. 현재 가장 흔히 쓰이는 방법은 Shear Test로 Solder를 PCB 기판에 접
<그림3: 유압식 만능재료 시험기>은 인장시험에 널리 사용되고 있는 유압식 만능 시험기이며 <그림4: 인장 시험 전후의 시편>는 이것을 이용하여 인장시험한 후 시험전후의 시편 모양(외양)을 비교해 놓은 것이다.
인장시험 후 시편은 단면적이 급격히 줄어드는 네킹(nec-king): 목이 생긴다는 뜻) 현상을