4. STRUCTURE DESIGN
4.1. Wing structure
Wing structure
The wing on the plane is a part that the highest load take. The large bending moments especially act on the point near the root of wing. Also, we should consider the number of spar, rib, position, skin thickness and taper ratio.
I Beam shape
4.2. I Beam
Beam theory shows that the I-shaped section is a very efficient form f
properties
인장 강도의 측정은 재료에 인장응력을 가해 견디는 강도를 측정한 것이다. 인장응력은 온도의 영향을 많이 받기 때문에 실험은 모든 재료가 같은 온도 하에서 실시되어야 한다. 또한 극한 UTS 측정시에는 온도와 Strain rate를 함께 고려하여야 한다.
3. Shear properties
Shear Property인 Shear Modulus
design project, we find that the experimental values of
critical properties of dibromoethane are actually different from the actual
values that are found from the handbook or the internet data column.
These differences could be seen from the graphs plotted. From the
results obtained, we can conclude that there are many possibilities that
might influencethe experiment data such as s
, 그리고 건물의 디자인과 구조적인 안정성 또한 복합적으로 고려하여, 실제로 실현가능성 있는 생태환경적인 건축물을 설계해본다. 또 생태환경적인 측면에 대하여 깊이 인식하고, 설계한 건축물이 세계적으로 진행되고 있는 지속 가능한 설계(Sustainable Design)에 적지만 동참하는 것을 목표로 한다.
Design의 변경, 표면처리의 변경 등의 문제가 현재의 과제가 되고 있다. 여기에서는 Solder 재료 변경에 의한 Mechanical Property의 측정으로 여러 Solder 재료들을 비교해 보겠다.
먼저 Solder Ball과 PCB 기판과의 접착력 Test를 위해 Mechanical Bonding Test를 실시하여 Sn-Pb Solder와 Pb-Free Solder 간의 차이를 확인하고 Pb-Free