[화학공학] carrageenan을 이용한 porous carrier의 제조

 1  [화학공학] carrageenan을 이용한 porous carrier의 제조-1
 2  [화학공학] carrageenan을 이용한 porous carrier의 제조-2
 3  [화학공학] carrageenan을 이용한 porous carrier의 제조-3
 4  [화학공학] carrageenan을 이용한 porous carrier의 제조-4
 5  [화학공학] carrageenan을 이용한 porous carrier의 제조-5
 6  [화학공학] carrageenan을 이용한 porous carrier의 제조-6
 7  [화학공학] carrageenan을 이용한 porous carrier의 제조-7
 8  [화학공학] carrageenan을 이용한 porous carrier의 제조-8
 9  [화학공학] carrageenan을 이용한 porous carrier의 제조-9
 10  [화학공학] carrageenan을 이용한 porous carrier의 제조-10
 11  [화학공학] carrageenan을 이용한 porous carrier의 제조-11
 12  [화학공학] carrageenan을 이용한 porous carrier의 제조-12
 13  [화학공학] carrageenan을 이용한 porous carrier의 제조-13
 14  [화학공학] carrageenan을 이용한 porous carrier의 제조-14
※ 미리보기 이미지는 최대 20페이지까지만 지원합니다.
  • 분야
  • 등록일
  • 페이지/형식
  • 구매가격
  • 적립금
자료 다운로드  네이버 로그인
소개글
[화학공학] carrageenan을 이용한 porous carrier의 제조에 대한 자료입니다.
목차
제 1장 Introduction

제 2장 Material and Method
2.1 Material
2.2 Experimental section
2.2.1 Crosslinking experiment
2.2.2 surfactant experiment
2.2.3 Glucomannan experiment
2.2.4 Bovine Serum Albumin substitution experiment
2.3 Method

제 3장 Result and Discussion
3.1 Crosslinking experiment
3.2 surfactant experiment

3.3 Glucomannan experiment
3.4 Bovine Serum Albumin substitution experiment

제 4장 Conclusion

제 5장 References

본문내용
carrageenan을 이용한 porous carrier의 제조


1. Introduction
porous carrier는 다공질의 운반체 혹은 지지체로서 액체를 흡수 혹은 유지 할 수 있는 특징을 가지고 있다. 자체는 촉매작용을 갖지 않으나, 촉매의 지지물 또는 희석물이 되는 물질로서 촉매의 유효 표면적을 크게 하여 활성을 증대시키고, 피독작용(被毒作用)에 대한 저항을 크게 하며, 반응열에 의한 국부 가열을 방지하는 등의 기능도 가지고 있다. 또한 세포의 지지체등으로도 활용이 가능하므로 조직공학이나 생물공학분야에서도 응용이 되고 있다.
carrageenan은 청정해역에서 자라는 홍조류 식물에서 추출한 물질로서 Galactose 및 Anhydro Galactose를 주성분으로 한 복합 다당류이다. 황산기의 결합 위치, 정도의 차이에 의해 κ-, λ-, ι-carrageenan의 세 개의 형태로 분류된다.
carrageenan은 공통적으로 30~60℃에서 친수성이 높고 보수력이 우수하다. 또한 천연고분자이므로 하이드로겔을 제조하였을 때 생분해성, 생체적합성이 뛰어나 인체에 무해하다.
다공성 하이드로 겔을 제조하는 과정에서 sodium bicarbonate와 acetic acid가 반응하여 CO2가스가 발생하는데, CO2가스가 빠져나간 자리에 기공이 형성되며 이것으로 인해 다공성의 하이드로겔이 제조된다. 이 기공들에서 일어난 모세관 현상으로 인해 짧은 시간동안 빠르게 물을 흡수 하게 된다.
우리는 carrageenan의 이러한 특성을 살려 물을 빠르게 흡수하는 다공성 하이드로겔을 제조하는 실험을 진행하였다.



2. Material and Method
2.1 Material

κ-carrageenan, bovine serum albumin (BSA), potassium hydroxide (KOH), potassium chloride (KCl), calcium chloride (CaCl2), sodium bicarbonate (NaHCO3), pluronics F68, F108, glacial acetic acid (CH3COOH), agar, carboxymethyl cellulose (CMC), casein, gelatin , pectin, sodium sulfate (Na2SO4), ammonium dihydrogen phosphate (NH4H2PO4), diammonium phosphate ((NH4)2HPO4), sodium chloride (NaCl), magnesium chloride (MgCl2), sodium hydroxide (NaOH), calcium hydroxide(Ca(OH)2)


2.2 Experimental section
2.2.1 Crosslinking experiment

1.75% κ-carrageenan solution 50ml에 0.075g의 BSA를 첨가하여 용해시킨다. 그 후 0.45g의 sodium bicarbonate를 첨가한다. 제조된 용액을 petri dish에 부은 후 25℃에서 24시간 방치한다. 그 후 10% acetic acid을 포함한 0.1M calcium chloride(또는 potassium hydroxide, potassium chloride) 용액에 침지하여 가교시킨다. 이와 같은 방법으로 table.1의 조성을 갖는 샘플을 제조한 후 가교시킨다. 제조된 하이드로겔들을 증류수로 세척한 후 40℃에서 72h 건조한다.


table.1

BSA 0.15wt%
F68 0.14wt%
F68 0.14wt%
F108 1.02wt%
0.875g
κ-carrageenan
0.875g
κ-carrageenan
0.875g
κ-carrageenan
0.875g
κ-carrageenan
0.075g BSA
0.07g
pluronics F68
0.27g
pluronics F68
0.51g
pluronics F68
0.45g
sodium
bicarbonate
0.45g
sodium
bicarbonate
0.45g
sodium
bicarbonate
0.45g
sodium
bicarbonate


2.2.2 Surfactant experiment

앞의 실험에서 계면활성제인 F68을 F108로 대체하여 table.2의 조성으로 샘플을 제조한 후 10% acetic acid을 포함한 0.1M calcium chloride(또는 potassium hydroxide, potassium chloride) 용액에 침지하여 가교시킨다. 제조된 하이드로겔들을 증류수로 세척한 후 40℃에서 48h 건조한다.

참고문헌
∙Petra Eiselt 외 3명, Porous carriers for biomedical applications based on alginate hydrogels, University of Michigan, 2000년

∙황형철, 곤약 glucomannan을 이용한 천연 스펀지 제조에 관한 연구, 대구대학교 산업대학원, 2009년 6월