General theoretical sintering temperature is 70% of the melting point
- ZrO2 : Tm – 2700 ℃ sintering temperature - 1890 ℃
- Al2O3 : Tm - 2050 ℃ sintering temperature - 1435 ℃
The actual sintering temperature
- ZrO2 : 1400 ℃
- Al2O3 : 1650 ℃
The alumina has Corundum structure , this is stable transformation of a-Al2O3
rhombohedral
T
4.2 단일금속 압분체의 소결
단일금속분말의 소결은 온도의 상승과 함께, 시간이 지남에 따라 그 기계적성질이 향상
고온도에서는 시간의 영향은 적고 그 금속의 용융점 가까운 온도에서는 수초로써끝남
4.2.1 밀도 및 수축
4.8은 금속분말을 여러 가지 압력으로 압분소결했을 때 밀도에 미치는 소
2.2.2. Al2O3 분말 입도 크기 분포에 따른 밀도
- 입도크기가 5㎛ / 0.5 ㎛ 인 분말의 분율에 따른 소결시 밀도 변화로, 큰 분말의 분율이 높아질수록 밀도는 현저히 낮아졌다.
2.2.3. Al2O3 온도에 따른 밀도
- 소결온도가 높아짐에 따라 소결체의 밀도 또한 높아지며 1600도 이상의 고온에서 95% 이상의
of this extraction process, the solvent should be separated from water or other impurities and recycled to extraction system because most of solvent is expensive.
2. 3. Compounding
PHB obtained in the extraction process as shape ofpowder. This powder is transformed into pellets in an extruder to make final product. At the same time, nucleating agents and plasticizers are added to impr
2. 2. 1 열가소성 플라스틱
열가소성수지는 열을 가해서 1차 성형을 하고나서 굳어진 뒤 다시 2차로 열을 가해도 쉽게 성형이 되는 플라스틱을 말하는데 주로 선형이거나 가지가 약간 달린 폴리머이다. (ex: 올레핀계, 스티렌계, E/P 등)
<그림 1. 열가소성 플라스틱의 분류>
2. 2. 2 열경화성 플라스틱