(1) 응력(Pa) : 인장기기와 연결된 소프트웨어에서 얻은 시간에 따른 하중 P(kgf)를 사용하여 SI단위 하중 P(N)로 나타내기 위해 하중 P(kgf)에 9.8m/s2를 곱한다.
실험 전 측정한 너비와 두께 치수를 이용하여 A0를 구할 수 있다.
응력 (N/m2)
(2) 변형률 : 실험 중 10초 간격으로 촬영한 사진을
(5) pressure 센서 (고도계)
< 제품명 : MPX4115AP >
Operating Pressure Range
15 ~ 115kPa
Operating Temperature Range
-40°C ~ +125°C
Supply Current
7 mA
Min Supply Voltage
Max Supply Voltage
4.85 V
5.35 V
가 격
40000원
특 징
․ 40℃~125℃에서 스스로 보정.
․ 정확/ 안정적인 압력 값 측정 가능
․ Microprocessor or Micro-cont
The 18% discount rate would give an approximation to the correct NPVs for projects with all (or most) of the inflows in the first year.
The present value of $1 to be received one year from now, discounted at 18% is: $0.8475
The present value of $1 × (1 – 0.08) (that is, $0.92) to be received one year from now, discounted at 10% is: $0.8364
The former calculation overstates the correct a
-아이버슨 회장의 과감한 혁신 전략.
1969년 최초로 Darlington제철소를 건설.
독일 철강설비업체인 SMS사가 상용화에 성공한 박슬라브 연주기 도입.
2차가공 판매 → 직접 철강 생산.
1989년 전기로를 통한 슬라브 성공 및 생산 → 원가경쟁력 확보.
Renovation & diversification
- 아이버슨 회장의 경영철학
가바 GABA ☞
가산 모형 additive model ☞
가산 색 혼합 color mixture ☞
가산 요인 additive factors ☞
가산 차이 모형 additive-difference model ☞
가산규칙 addition rule ☞
가산성 additivity ☞
가산적 색채 혼합 additive color mixture ☞
가산적 additive ☞
가상 체험 virtual experience ☞
가상 현실 virtual reality ☞
가
Ⅰ. INTRODUCTION
In fourth semester most of our department students attend the subject of mechanical manufacturing practice and we have made a bolt by ourselves. But the process was not a soft job. A bolt and nut is used diversely but it seemed that we don't know much about a importance and manufacture of bolts.
A bolt is a threaded fastener used in industry to make two or more mechanical
SOD에 대한 이해
1. THE RSL99 LANGUAGE FOR ROLE-BASED SEPARATION OF DUTY
CONSTRAINTS
Separation of duty(SOD)는 컴퓨터가 생기기 전부터 알려지고 사용되었던 fraud(속임, 사기)와 error를 방지하기 위한 fundamental technique이다. 이에 대한 연구가 이전부터 있었지만 SOD policies에 대해서 체계적인 방법으로 설명된 적은 거의 없
2. 자료 처리 시스템
1) 일괄처리
- 원시 데이터(raw data)를 수집하고 분류 정리하여 파일(file)에 수록하는 사전 준비 작업 필요
- 시스템 중심 처리 방법으로 높은 시스템 성능과 낮은 처리 비용이 특징
- 순차 접근 방법 이용 업무에서 주로 사용
2) 온라인 처리
- 실시간(real time) 처리
- 사용자 중심 처