Converts sunlight directly into electricity
Non polluting
Long lasting sources of energy
No need of maintenance
In the long run, solar electricity is cheaper
Electrons of dye absorb solar energy
Electrons of dye are excited & Generate electron-hole pairs
Electrons transfer from dye to FTO via TiO2
1/2 I3- + e 3/2 I- at counter electrode
3/2 I- 1/2
Red, Green, and Blue LEDs for White Light Illumination
This LED application is structured by three chip(red, green, blue). Each chip emits three color. This structure has more strong light intensity than single chip WLED, but process is too complicate and not cost effective. And electron transfer is slow caused by 2-dimensional chip.
2. RGB-LED Nano Wire ??
Existed RGB-LED structure is 3-c
Light Emitting Diode (발광 다이오드)란 다수 캐리어가 전자인
n-type 반도체 결정과, 다수 캐리어가 정공인 p-type 반도체 결정이
서로 접합된 구조를 가지는 광전변환 반도체 소자로서, 화합물
반도체의 특성을 이용해 전기신호를 원하는 파장 대역을(적외선-
가시광선-자외선) 갖는 빛으로 변환시켜 신호
독립변수와 종속변수의 관계를 알아보기 위해서는 회귀분석을 사용하는데, 독립변수의 개수가 1개일 때는 단순회귀분석을 한다. 하지만 우리가 알려고 하는 종속변수에 영향을 미치는 독립변수가 2개 이상이므로 다중회귀분석을 이용한다. 종속변수를 Repurchase로 두고 독립변수를 크게 component1(Taste, Ser
2. Method
[실험재료]
premix, template & primer, D.W, mineral oil, thermocycler(PCR기계), Seakem LE agarose, gel caster, 1×TAE, EtBr, 마이크로피펫, 1.5㎖ tube
[실험방법]
① premix가 들어있는 20㎕ tube에 template DNA 1㎕, primer 2㎕를 D.W 17㎕를 넣고 잘 섞기 위해 vortexing 해준다.
② 적당하게 centrifuge 해준다.
- vortexing 시에 위로
light chains: 40 V x 5 J = 200
light chains: 30 V x 4 J = 120
H chains: 40 VH x 27 DH x 6JH = 6,480
320 L chains x 6,480 H chains = 2.1 x 106
Junctional diversity (addition or deletion of nucleotides at recombination sites, especially of H chain), estimated to add 3x107 fold to overall diversity.
Recombination signals
Rag-1/Rag-2/Artemis
Introduction
Mitochondria & cell cycle???
미토콘드리아는 일반적으로 에너지대사를
관장하는 기관으로 알려져 있지만,
우리 조에서는 세포주기조절과 관련된 기능을
중점으로 조사를 하였습니다.
2. Estrogen에 의한 cell cycle
ROS?
Reactive Oxygen Species 의 약자로 oxygen ions, free radicals, 그리고 perox
LCD란(Liquid Cristal Display)?
LCD는 액정의 특성을 이용해 만드는 디스플레이이다. 액정이란 명칭은 고체상과 액체상의 중간 상태인 액정상을 가리키는 경우와 이러한 액정상을 갖는 물질 그 자체를 가리키는 경우의 두 가지 의미로 사용되고 있다.
TFT-LCD의 제조공정
가) 초기세정
· Glass표면에 묻
유리기판 (glass)
Glass를 TFT line 투입 전 Cleaning
이용하여 Glass표면에 묻어 있는
불순물을 제거
Gate 전극 생성 (Gate electrode)
Sputtering에 의하여 Gate 금속막 증착
절연막 및 반도체막 생성
(Insulator & a-si)
Photography에 의하여 생성
Date 전극 생성 (Date electrode)
Etching으로 Glass위에 증착된 금속막의