1. 개요
현재 국내 대부분의 정수장에서는 응집-모래여과공정이 정수처리의 핵심을 이루고 있으며, 다년간의 기술 축적으로 인하여 어느 정도 안정적으로 처리 할 수 있기 때문에 일본 및 구미에서도 많이 채용하고 있다.
그러나 일본, 미국의 Crytosporidium 유출 사건을 계기로 탁도 수질기준의 강화 및
Ⅲ Flocculation
The purpose of flocculation is to uniformly mix coagulated water to produce either settleable or filterable floc and accelerate the rate of particle collisions, causing the agglomeration of electrolytically destabilized colloidal particles into settleable and filterable sizes.
Considerations of flocculation are:
1. Baffling to prevent of flow short-circuiting
2. Tapered
Flocculation Basins)
플록형성지의 설계착수에서 가장 먼저 플록형성지의 형태를 결정해야 한다. 이를 위해 가장 중요한 인자는 원수의 탁도와 처리수량의 변화이다. 원수의 탁도가 높고 처리수량 변화가 큰 경우 기계적 플록형성방법을 채택하는 것이 좋고, 비교적 수질과 수량이 일정한 경우 수리학적
1. Justifications of the proposed schemes -the structural problem& the chemical injection locations
2. Design impeller and tank type affecting energy efficiency, cost, flocculation size. Design Diffuser Walls and Baffles used for Minimizing Short Circuiting
3. Design launder type, structure, sludge and scum model
Filtration의 세번째 key concept 이유: (to promote readily biodegradabl
1.실험의 목적
응집이란 폐수의 탁도나 색의 원인이 되어있는 불순물을 분리 제거할 경우 보통은 침전처리하나 탁질의 입자가 작아서 침전이 안 되는 경우 입자를 크게 하여 침강시키는 조작을 말한다. Jar tester 실험장 치를 이용하여 폐수처리의 최적 PH조건을 결정하고 그 폐수에 적합한 최적응집제