reinforcing rod because is alkalinity is security
3) have excellent modeling.
4) ability that have high hardness and stand in shock of pedestrian or machine operation etc. is big.
On the other hand, shortcoming is
1) withstand to Apchukryeok, force that press, but is weak in tensility, force that pull.
2) because weight is high than strength, weight of building is heavy.
This is repleti
Ⅰ. 서론
현재 전 세계의 항공기 사업은 크게 미국의 보잉과 유럽의 에어버스로 양분되고 있습니다. 두 회사는 항공기를 개발함에 있어서 다른 철학과 미래 전망으로 각자의 특징을 가지는 비행기를 개발하지만 두 업체의 지향하는 바는 같습니다. 바로 낮은 연비를 가지는 고효율의 비행기를 개발
완전 소성 재료의 구성방정식으로써 널리 사용되는 것은 대체적으로 최대 비틀림에너지기준(von Mises yield criterion)이다. 또한 최대 전단응력기준과 최대 비틀림에너지기준 모두 응력결합 하에서의 점탄성(viscoelastic) 현상의 해석에도 사용된다. 이러한 생각을 확장하면 변형률-경화 재료(strain-hardening mater
<그림3: 유압식 만능재료 시험기>은 인장시험에 널리 사용되고 있는 유압식 만능 시험기이며 <그림4: 인장 시험 전후의 시편>는 이것을 이용하여 인장시험한 후 시험전후의 시편 모양(외양)을 비교해 놓은 것이다.
인장시험 후 시편은 단면적이 급격히 줄어드는 네킹(nec-king): 목이 생긴다는 뜻) 현상을
Tensile
strength
(MPa)
Yield
strength
(MPa)
Elongation
(%)
Reduction
of Area
(%)
Hardness
(Hv)
M
SUH3
941
512
23.4
48.0
411
SUH35
1082
796
29.8
28.4
484
Table. 2 Material properties of base metals
(단위 : mm)
지름
D
표점거리
L
평행부길이
P
어개부의 반지름
R
12
50
약 60
15 이상
비고
1.이 시험편은 평행부를 기계