zeros(841,1);
sum_v = zeros(841,1);
average_u = zeros(841,1);
average_v = zeros(841,1);
% 아래 3개의 for문을 통해 총 300개의 속도장 데이터를 읽어들이고, 각각의 파일을
% 읽음과 동시에 상기 선언된 변수(sum_u, sum_v) 위로 누적 합계를 덮어쓰면서 300
% 프레임의 속도 벡터 총합을 구한다.
for i = 1:9
filename = strcat('2조000
2. 1번에서 구한 속도장으로 Mean recirculation region(Wake bubble)의 길이를 구하라.(Grid보다 작은 값은 Interpolation을 해야 함.) 그리고 이 값의 의미를 설명하라.
2.1 Mean recirculation region(Wake bubble) 의미
Mean recirculation region의 길이를 구하기 전에 먼저, 그것이 무엇이고 어떤 의미를 가지는 지에 대해 알아보기로
layer의 vortex가 생기게 된다. 이 때 vortex에 의해 유동은 안쪽으로 회전하며 기존의 유동 진행방향과는 반대 방향의 속도 성분을 가지는 역류를 발생시키는데, 이 역류를 wake라고 한다. 그리고 이러한 유동이 존재하는 구간을 Mean recirculation region라고 한다. 이를 아래의 그림1.1 S. BALACHANDAR, R. MITTAL and F. M. NA
1. Introduction
1) Definition of preservation and food-spoilage micro-organisms
Food preservation is the process of treating and handling food to stop or greatly slow down spoilage (loss of quality, edibility or nutritive value) caused or accelerated by micro-organisms. Some methods, however, use benign bacteria, yeasts or fungi to add specific qualities and to preserve food (e.g., cheese, wine
zeros(length(u),1);
Sum_v=zeros(length(v),1);
flag0=1;
end
Sum_u=Sum_u+u;
Sum_v=Sum_v+v;
end
%평균 속도를 구한다.
Avg_u=Sum_u./299;
Avg_v=Sum_v./299;
%Time Average 된 데이터를 time_average.txt 파일에 출력한다.
fid = fopen('time_average.txt', 'wt');
fprintf(fid, '%s\n', 'Time Average Data');
fprintf(fid, '%c\t\t\t%c\t\t\t%c\t\t\t%