2. Main Topics
2-1. Metal foams (Main journal)
2-1-1. Principle
“Developed a theoretical model to evaluate the overall heat transfer coefficient, considering both conduction through the solid and heat exchange from the solid surface to the gas.”
An accurate determination of the geometrical parameters of the foam was considering the difference in the pore size and the measured value res
완전히 용융되어 전류 path가 melt pool 에만 존재할 때 RESET 펄스를 끊으면 재료는 quenching 되고 비정질 상태로 남게 된다. 이때 완전히 용융되지 않았던 일부 결정 알갱이 (crystallite)들이 남게 되는데 이 결정 알갱이들은 SET 동작 시 conducting filament의 핵(nuclei) 으로 작용하여 빠른 결정화를 이끌게 된다.
size particle was selected Fig.3a and a spot analysis was conducted. From the acquired spectrum Fig.3b, the particle was identified as another Nb precipitate. Prior to this study, it was certain that Nb precipitates as particles above 50nm in steel, but identifying precipitates below this size was not clarified. However, from this analysis conducted on carbon extraction replicas using an FE-SEM,
Ⅰ. 서론
1.1. 연구배경 및 목적
순철, 45C, 연강, 편상흑연주철, 구상흑연주철의 마운팅, 폴리싱, 부식, 사진현상 및 인화의 과정에 중점을 두고 각 시편의 금속조직을 관찰한다.
각종 재료로 제조된 부품의 외관 결함은 용이하게 발견할 수 있으나, 내부결함은 찾아내기가 용이하지 않다. 국산부
☞ Polyamide(PA:나일론) 재료의 일반적 특성
● 개요
Polyamide는 기계적성질 특히, 내충격특성이 우수한 결정성 플라스틱이다. 그리고 내마찰/마모특성, 내약품성, 내유성 등이 우수하다. 녹는점이 높고 흡수성이 우수한 것도 특징이다. 흡수하면 치수변화가 크고 기계적 강도는 저하하나 유연성, 내충