stress condition)의 상태에 있다고 할 수 있다.
유체는 고체에 비해 변형하기 쉽고 어떤 형상도 될 수 있으며, 자유로이 흐르는 특성을 지닌다. 정지하고 있는 유체에는 면에 평행인 접선 변형력(接線變形力)이 작용하지 않고 면에 수직인 압력만 작용하지만, 운동하고 있는 유체에는 점성 때문에 접선변형
(2002)
산지 : 한국, 중국, 일본, 러시아
가시오가피의 성분과 효능
비 배당체 : Sesamin, Syringaresinol
배당체 : eleutheroside B (=syringin), eleutheroside A, B1, C, E
다당체 : eleutheran A~G
Adaptogenic / Stress reducing : eleutherosides
Gonadotropic : eleutheroside B and B1 mixture
Antidiabetic : eleutheroside B
Immunostimulant : eleutheran A~G
• 공칭응력 (Engineering Stress) = 하중/원단면적
• 진응력 (True Stress) = 하중/실제단면적
• 공칭변형률 (Engineering Strain) :
• 진변형률 ( True Strain) :
• 공칭스트레인과 진스트레인의 관계
다. 0.2% Offset 이론
연성재료와 취성재료를 구분하는 기준으로 정한 것은 없지만 일반적으로
position, skin thickness and taper ratio.
I Beam shape
4.2. I Beam
Beam theory shows that the I-shaped section is a very efficient form for carrying both bending and shear loads in the plane of the web. On the other hand, the cross-section has a reduced capacity in the transverse direction, and is also inefficient in carrying torsion.
4.3. Two spar structure
Two spar structure
2. 실험 내용 및 이론적 배경
1) Stress (응력 , σ) : 단위 면적 당 작용하는 하중 (σ=F/A)
2) Strain (변형률 , ε) : 작용 하중에 따른 길이의 변화량을 초기 길이로 나눈 값 (ε=ㅿℓ/ℓ)
3) 응력-변형률 선도 (Stress-strain diagram) 구하기 : 시편을 축 방향으로 인장시키는
인장 시험에서 얻는 데이터로부터 하중-
실험용 jig를 설치한 측정한다.
각 시편의 특성에 따라 가해지는 힘에 따라 변형 또는 파단이 일어나게 되는데 이를 각각 인장 변형률 (tensile strain)과 인장강도(tensile stress)라 한다.
인장변형률(ε) : ε =∆L/L0
인장강도(σ) : 변형(또는 파단)이 일어날 때의 힘 / 변형이 일어나기 전 시편의 단면적.
Many factors, such as the way to experiment shear strength, the choice of shear strength, the way to analyze, the characteristic of shear strength, slope‘s geometrical condition and the degree of uncertainty of other conditions, the cost spent to lower slope’s slope or to decrease the height, the result and the amount of damage when slope is destructed, judging whether slope is the permanent
Beam은 수직재의 기둥에 연결되어 하중을 지탱하고 있는 수평 구조부재로, 축에 직각 방향의 힘을 받아 주로 휨에 의하여 하중을 지탱하는 것이 특징이다. 즉, Beam은 1차원적인 형태로 구현할 수 있고, Beam에 제공되는 load에 의해 Shear force와 Bending Moment가 유발된다. 위와 같이 x축으로 뻗어있는 Beam의 미분
성질을 탄성(elasticity)이라 하고, 외력이 지나치게 큰 경우 외력을 제거한 후에도 영구히 변형력이 남는 성질을 소성(plasticity)이라고 한다
․변형력
→ 고체의 모양을 변형시키는 변형력(stress)은 작용하는 힘 F의 단면젹 A에 대한 비로 나타낸다. 따라서 변형력의 단위는 N/m2이다.