1. Pump에서의 Cavitation (공동현상) 에 대하여 기술하고 이로 생길 수 있는 문제점과 그 방지책에 대해 논하시오
- Cavitation이란
유체가 넓은 유로에서 좁을 곳으로 고속 유입하거나 벽면의 요철, 만곡부 등으로 흐름이 직선적이지 못할 때 유체는 저압이 되고 포화증기압보다 낮아지면 기화되어 기포가
Bonding Test를 실시하여 Sn-Pb Solder와 Pb-Free Solder 간의 차이를 확인하고 Pb-Free Solder중에서도 각 재료마다의 Mechanical Bonding Test를 실시하여 Bonding Force를 체크한다. 보통 Soldering 된 제품이 받는 Stress 는 Tensile Stress 보다는 Shear Stress 가 주요하기 때문에 Solder 선택 시에는 Solder의 Tensile Property 보다는 Shear Pr
탄성률이 큰 것으로 보아 elastomer에 가깝다고 판단되었다.
1. INTRODUCTION
1.1 실험 목적
인장 및 굴곡 실험을 통해 고분자 재료의 인장강도(tensile stress), 인장변형률(tensile strain), 인장탄성률 (tensile modulus)을 구해보고, 각각의 기계적 물성값으로 나타내질 수 있는 재료의 고유한 특성에 대해 알아본다.
-Conclusion & Discussion
Poisson's ratio is derived by dividing the horizontal strain modulus by perpendicular strain modulus. Poisson's ratio is a characteristic value of materials, and concretes have 0.16∼0.22 of it. The Poisson's ratio from the first experiment is 0.18 and this is comprised in the range of theory, and the value from the second experiment is 0.16 which also comes under th
2.4. Bonjean Curve
많은 학생들이 Bonjean Curve 에 대해 답을 하지 못하였다고 하셨다. 우리 조원들도 이 문제에 대해 거의 답을 하지 못하였다고 했다. Bonjean Curve는 부력의 개념이다.
그림 Bonjean Curve
임의의 수선에서 횡단면의 면적은 Simpson's 1st Rule 같은 방법으로 구할 수 있고 이를 수선변화에 따른 곡