Background of Experiment
□ Al-Si Alloy
AI + Si = Al-Si Alloy
1. Low melting point
2. light
3. Large heat capacity
4. Insoluble to each other
.
.
.
Result and Analysis - EDS
□ Composition Analysis
Al, Si is almost insoluble to each other at rsoom temperature.
All solid phase will have either 100% Al phase or 100% Si phase.
In describing the answer to the question below, try to share your opinions on the basis of evidences such as articles and books. Also provide information of the evidence (author, title, journal name, etc.).
1. Explain what happens in terms of mechanical/chemical properties when making products using metal-based 3D additive manufacturing technology. (10 points)mechanical properties
전통적
1. Li / S battery
현재 차세대 이차전지에 대한 관심이 집중되면서 2차전지의 한계로 지적되던 에너지 밀도 상승의 한계, 안정성에 대한 불안감, 그리고 높은 원가 부담을 개선하기 위한 새로운 형태의 전지가 등장함은 물론 과거에 소개되었던 개념까지 재조명 받고 있다. 풍부한 자원인 황을 활용하여
Fatigue Failure Process
균열발생 단계(Crack-Initiation Stage)
공업재료는 연성이며 제조한 상태대로는 균열이 존재하지 않지만, 일반적으로는 입자, 함유물 등을 포함하고 있다고 가정한다. 미시적 크기에서 금속은 균질하지도 않고 등방성도 아니다. 또한 기하학적으로 응력집중(노치)이 되는 부분이 있다