정의
화학식은 NH3이며 약염기성을 띠는
질소와 수소의 화합물이다.
고약한 냄새, 독성을 가지며 가벼운 무색의 기체이다.
특성
- 용해도 52g/100ml (20℃)
- 녹는점 -77℃
- 끓는점 -33.4℃
용도
- 합성 비료의 재료
- 냉장고의 냉각제
- 질산, 요소의 합성 원료
- 화학 공업 원료
- 암모니아수
Thermodynamics
Thermodynamic factors involve properties of the solute and the solvent. For example, If two molecules pass the thermodynamic factors, that is, if the thermodynamic factors indicate that they can dissolve with each other, then kinetic factors can take effect.
With stir, system(coffee cup) is given energy, and it causes internal energy to increase. Increased internal energy makes
사료된다.
6. 참고문헌
1) J.M Smith and H.C Van Ness, "Introduction to chemical Engineering
Therodynamics"McGraw-Hill, N. Y.
2) Park S.J and Choi B.H : Energy R&D
3) Park S.J and Rhee B.S : HWAHAK KONGHAK vol 28, No4
4) Park S.J and Nho J.S : HWAHAK KONGHAK vol 33, No4
5) Elliot ․ Lira , Introductory Chemical Engineering Thermodynamics
6) http://www.cheric.org
BulkGibbs free energy of formation of the amorphous oxide islarger than that of the corresponding crystalline oxide.
Thin filmThe thin amorphous metal-oxide film on its metal substrate can be stable modification with respect to the corresponding crystalline metal-oxide film the same substrate.
1. Interaction contribution to the - interfacial energy
Following the treat
온도는 물체를 구성하는 입자가 얼마나 진동하는지를 나타내는 척도이다. 과학자들은 대체로 Kelvin온도를 이용한다. Kelvin 온도의 단위는 K이다. 켈빈 온도에서는 음(-)의 값이 존재하지 않으며 0K에 해당하는 온도를 절대영도(absolute zero)라고 한다. 절대 영도를 섭씨온도로 나타내면 ?275.15℃에 해당한다.
7.2 Method
7.2.1 Physical Method - Distillation
7.2.1-1. Distillation
증류에 의하여 원유를 구성하고 있는 탄화수소를 그 비등점에 따라 분류하는 공정으로,
보통 우리가 알고 있는 정유공장에서 수행하는 기본적인 공정으로 원유를 처리할 수 있는
모든 공장에서 수행할 수 있는 공정이라고 생각하면 된다.
1. 서 론
대부분의 영역에서 과학이 해왔던 일은, 우리 주변에서 일어나는 일들을 어떻게 설명할 수 있는가에 초점을 두었었다. 이를 위해 복잡해 보이는 여러 가지 현상들을 가능한 한 간단한 형태로 바꾸어 기본적인 원리를 알아내고자 하는 작업들이 꾸준히 진행되어 왔었다. 화학의 영역도 여기
1. Introduction
혼합 기체 평형 데이터는 흡착형 기체 분리 공정의 설계와 발전에 아주 중요한 요소다. 이런 데이터를 실험으로 일일이 얻기에는 너무 많은 노력과 시간이 필요하므로 단일 성분 흡착등온 데이터에서 혼합기체 흡착평형 데이터를 추측하는 것이 바람직하다. Ruthven(1984), Yang(1987), Tien(1994)
5.2 Drug Delivery System
5.2.1 Advantage of Nano-drug delivery system
By diagnosis, and for treatment, we need enhanced drug delivery system. Drug delivery system of these days is just eat and let it flow through the body. It is not good at efficiency. Because the digestive system sometimes digest and remove the drug before it reaches to the target.
For enhancing the efficiency of drug
CAVITY
일정한 속도의 액체가 면적이 작은 부위(수축부 Vena Contracta)를 지날 때 유체의 속도(V)는 빨라지고 압력(P)은 떨어진다, 이때 액체압력이 그 액체의 증기압(Pv)보다 낮아지면 기포가 발생 Vapor 상태가 되는데 이것을 Cavity라 한다. 이 기포는 다시 압력이 상승함에 따라서 밸브Trim 이나 Body 내벽에서