이 실험은 Wetted Wall Column을 이용하여 물과 공기를 접촉시켜 그 농도차로부터 물질전달 계수를 계산하는 것이다. Wetted Wall Column은 물질전달이 일어나는 경계면이 뚜렷하며, 그 면적을 계산하기 쉽다는 점에서 물질전달 계수를 계산할 수 있는 명확한 방법이 된다. 물속에서 산소의 확산계수를 구함으로
17.액정유리
-제조: 캡슐 상태의 액정분자들을 필름에 부착시켜 이것을 일반 판유리에 합체시키고 전선코드를 설치.
-특징: 전압 연결 시 투명 혹은 불투명한 유리상태로 또는 각종 영상을 상영할 수 있는 대형스크린 시스템으로 변화 가능함. 액정유리는 전기가 차단되면 액정분자들이 제멋대로 배열
2.3 C-V graph
The measured MOS capacitance (called gate capacitance) varies with the applied gate voltage.
① Measurement of C-V characteristics
-Apply any DC bias, and superimpose a small (15 mV) ac signal
-Generally measured at 1 MHz (high frequency) or at variable frequencies between 1KHz to 1 MHz
-The dc bias VG is slowly varied to get quasi-continuous C-V characteristics
② C-V chara
4. Equipment
4.1 RCA cleaning
RCA cleaning is a series of rinsing procedure prior to experiment with Si wafer. The purpose of the RCA clean is to remove organic contaminants (such as dust particles, grease or silica gel) from the wafer surface. There are three steps to be performed. The first step is to remove organic contaminant from surface of wafer. Second step is to remove any oxide layer
plate)에서 이루어진다. 즉 이 뼈끝판의 변두리인 뼈몸통쪽에서 연골이 새 뼈로 바뀌고 가운데 연골은 다시 증식을 하여 또 뼈로 바뀌는 일을 되풀이함으로써 뼈가 길이로 늘어나는 것이다. 성장이 끝나가게 되면 이 뼈끝판이 더 이상 자라지 않고 그 자리가 완전히 뼈로 바뀌어 이것을 뼈끝선(epiphyseal lin