→ Produce isotropic light with different status
High efficiency for converting electron to photon (Low power consumption, 1/8 of light bulb, ½ of Fluorescent lamp)
Tiny light sources→Miniaturization, Weight lightening
Semipermanent life span
Fast reaction rate for change
Excellent durability and Eco-friendly
Produce RGB full color as blue LED commercialized
Various application
Isotropic)인 물질이다. 응력과 변형률은 선형 탄성영역에서는 일정한 비례 관계를 나타내며, 이를 Hooke's Law 라 하고 σ = Eε 로 표시한다. 여기서, E를 탄성계수라 하며 응력-변형률 선도에서 선형 탄성영역의 직선부분 기울기를 의미한다. 이는 물질이 가지는 고유한 특성(Material Property)으로서 물리적으로
isotropic (amorphous) fluid.
Tm is the temperature at which the LCP changes from a solid (nematic structure) to an organized fluid.
Structure of solid and nematic fluid are similar (low heat of fusion)
Because of high chain stiffness and chain regularity, LCP have rod like structure retained in the melt as well as strong orientation in the melt.
액체처럼 흐를 수 있지만, 분
1 GPa
Elastic modulus Nanoindentation > 6 GPa
Adhesion Tape pull, modified-edge lift-off Delamination-free
Disavantages
Weakens mechanical properties
Lower thermal conductivity
Narrow pore distribution to ensure dielectric constant is homogeneous and isotropic
Pores need to be closed cells to prevent crack propagation and moisture absorption
Need to add silica to seal surface pores
isotropically Conductive Adhesive, ACA),등방성 전도성 접착제(Isotropically Conductive Adhesive, ICA)로 나눌 수 있다.
비전도성 접착제의 접속에서는 수분에 의한 고분자 상의 부피 변화 및 고분자와 칩 또는 기판 간의 계면 박리, 범프와 패드 사이의 벌어짐 및 접착제 또는 칩의 크래킹 등이 일어나 접속 불량이 발생