이미지 처리 시스템(그림 1.1)은 장면을 비추기 위한 광원, 센서 시스템(보통 CCD 카메라) 그리고 센서 시스템과 컴퓨터 사이의 인터페이스로 구성된다.
그림 1.1 이미지 처리 시스템의 구성요소들
다른 것들 중에서 인터페이스는 아날로그 정보를 컴퓨터가 이해할 수 있는 디지털 데이터로 변환한다.
3.B University of Colorado CU)
콜로라도 주 Boulder에 위치한 University of Colorado at Boulder는 콜로라도 주에서 가장 큰 대학교이다. 학교 내에 위치한 ATLAS Building은 Leadership in Energy and Environmental Design program(이하, LEED program) 으로 미국의 Green Building Council의 gold rating을 받았다.
LEED program은 green building의 디자인, 설
1.1 보고서의 의의
과거에 작업은 생산량이 바로 일의 효율로 간주되어 왔다. 하지만 최근에 ‘근골격계질환’ 등이 이슈로 떠오르면서 인간공학에 대한 관심이 높아지고 있다. 인간공학의 초점은 ‘인간이 만들어 생활의 여러 국면에서 사용하는 물건, 기구, 혹은 환경을 설계하는 과정에서 인간을
3D printing
3D printing or additive manufacturing (AM) refers to any of the various processes for printing a three-dimensional object. Primarily additive processes are used, in which successive layers of material are laid down under computer control. These objects can be of almost any shape or geometry, and are produced from a 3D model or other electronic data source.
Basic principles
If the
4.3 System
First, MBC holds a performance-related pay (bonus) of which measurement methods consist of personal assessment of boss, ratings and general comments. Secondly, as to information system, online system is installed now. Information like money spent and budget is refined and then transferred to manager, and minor information is shared by every member. Third, planning and budgeting, the b
This idea can be applied to logistics as well. In the past, logistic cost has been defined in purely monetary terms. However, as not only in the EU but also in the USA and other countries became more and more aware of environmental problems ,for instance because of climate change, air pollution, noise and accidents, environmental considerations has been taken in logistics kfield. This is how Gree
1 GPa
Elastic modulus Nanoindentation > 6 GPa
Adhesion Tape pull, modified-edge lift-off Delamination-free
Disavantages
Weakens mechanical properties
Lower thermal conductivity
Narrow pore distribution to ensure dielectric constant is homogeneous and isotropic
Pores need to be closed cells to prevent crack propagation and moisture absorption
Need to add silica to seal surface pores
conducting polymers, etc. But, naturally, soft lithography has some drawbacks such as deformation of the elastomeric stamp of mold, density of defects in the formed pattern, and difficulty in high-resolution registration. So, to solve these problems, we could find the following article. "Hybrid NanoImprint-Soft Lithography with Sub-15nm Resolution by Zhiwei Li, Yanni Gu, Lei Wang, Haixiong Ge, We