1. Pump에서의 Cavitation (공동현상) 에 대하여 기술하고 이로 생길 수 있는 문제점과 그 방지책에 대해 논하시오
- Cavitation이란
유체가 넓은 유로에서 좁을 곳으로 고속 유입하거나 벽면의 요철, 만곡부 등으로 흐름이 직선적이지 못할 때 유체는 저압이 되고 포화증기압보다 낮아지면 기화되어 기포가
5. 실험방법
① 유체관로 실험장치의 펌프 전원을 넣는다.
② 고수조에 물을 채운다.
③ 관로 상에 있는 밸브를 모두 개방하고, 펌프를 작동하여, 마노미터 파이프 속에
있는 공기방울을 모두 제거한다.
④ 유량 조절 밸브인 a, b를 조작하여 유량을 일정하게 맞춘다.
⑤ 관로 상의 모든 밸브를
2.3 C-V graph
The measured MOS capacitance (called gate capacitance) varies with the applied gate voltage.
① Measurement of C-V characteristics
-Apply any DC bias, and superimpose a small (15 mV) ac signal
-Generally measured at 1 MHz (high frequency) or at variable frequencies between 1KHz to 1 MHz
-The dc bias VG is slowly varied to get quasi-continuous C-V characteristics
② C-V chara
4. Equipment
4.1 RCA cleaning
RCA cleaning is a series of rinsing procedure prior to experiment with Si wafer. The purpose of the RCA clean is to remove organic contaminants (such as dust particles, grease or silica gel) from the wafer surface. There are three steps to be performed. The first step is to remove organic contaminant from surface of wafer. Second step is to remove any oxide layer
of strong growth between 2004 and 2007 is a factor.
PAYMENT INCIDENT INDEX
▪ A country of High CR: China
▪ RISK ASSESSMENT
Good resilience in 2009 thanks to the economic stimulus programme with a rebound expected in 2010
The economy began to slow in 2008 due mainly to domestic imbalances (overcapacity in several sectors) and policies that remained restrictive too