Figure 13 shows that cryo pump is cooling pump. It means this pump is cooling, liquefaction and store air, not pumping. Generally, it has 3 processes like condensation, absorption and trap at low temperature. The cooled air or molecules do not have any momentum so it is no possibility to heat any molecules. It means vacuum.
Cryo pump have High emission velocity and high emission capacity so it
Fin Fouling
*팬에 의해 분해된 전체 공기흐름은 핀 관의 더러움에 상관없이 일정하게 남아있다.
*팬 분해압력은 핀 관의 더러움과 상관없이 일정하다.
*팬을 운전시키는 모터 위 에서 암페어 수는 핀 관의 더러움과 상관없이 일정하다.
-관을 더럽히는 외부물질 때문에 공기의
역 흐름이 증가함으
Vacuum Cooling)
진공용 기내에 수분이 많은 물질을 넣고 용기 내를 진공으로 해주면 낮은 온도에서 수분이 증발하며 증발잠열 증발잠열을 뺏어 가는 원리를 이용한다.
5. 전자 냉동법(Thermo Electric Refrgeration)
서로 다른 두 금속을 Ring 모양으로 접속하여 전기를 흐르게 하면 금속의 접합부의 한쪽 끝에
vacuum-packing, canning, preserving in syrup, sugar crystallization, food irradiation, and adding preservatives or inert gases such as carbon dioxide. Other methods that not only help to preserve food, but also add flavor, include pickling, salting, smoking, preserving in syrup or alcohol, sugar crystallization and curing.
As the preceding paragraphs say, many kinds of food preservation technolo
Vacuum and freeze drying processes are used for products with delicate flavours and textures like coffee granules, eggs, prawns and vegetables. The process involves freezing, and evaporating the ice away, under reduced pressure. It is an expensive process but gives a produce which is high in flavour and palatability. Milk may be dried on rollers or by spraying concentrated milk into hot air chamb
-PVD 물리 증착법 : 시간이 적게 드는 특징이 있다. (ex : 열증착, E-beam 증착법)
-CVD 화학 증착법 : 오래 걸리지만 박막을 표면에 고르게 증착시킬 수 있다.
1. Thermal Evaporator의 구조 및 설명
Thermal Evaporator의 설명
Evaporation의 방법으로는 thermal evaporation과 e-beam evaporation 그리고 이 둘을 조합하는 방법
2. 진공청소기의 구조 및 원리
우리 주변에서 흔히 볼 수 있는 먼지봉투 진공청소기의 구조는 아래 그림에서처럼 일반적으로 세 부분으로 구성된다. 즉, 진공청소기의 내부는 오물과 먼지가 포함된 일반 공기가 들어오는 호스 부분, 오물과 먼지를 걸러내 주고 깨끗한 바람만 통과시키는 필터 부분,
1.자이로의 원리
-한 점이 고정되어 있는 축 주위를 회전하는 것을 팽이라 하며 그 고정점이 회전체의 중심인 것을 자이로스코프 줄여서 자이로라 한다. 회전체가 3축에 대해 모두 자유롭게 움직일 수 있으면 자유도가 3인 3축 자이로이며 정침의와 인공 수평의에 사용된다. 3축 중 한축이 고정된 자이로
1. Pump에서의 Cavitation (공동현상) 에 대하여 기술하고 이로 생길 수 있는 문제점과 그 방지책에 대해 논하시오
- Cavitation이란
유체가 넓은 유로에서 좁을 곳으로 고속 유입하거나 벽면의 요철, 만곡부 등으로 흐름이 직선적이지 못할 때 유체는 저압이 되고 포화증기압보다 낮아지면 기화되어 기포가