velocity를 갖게 되기 때문에 더욱 강한 tumble motion을 만들 수 있게 되었다.
GDI 엔진에서 성층화 연소가 가능하기 위해서는 혼합기체에 점화가 잘 일어나게 하기 위해서 spark plug 주변의 공기가 좀더 농하게 되도록 연료를 잘 분사해주어야 한다. 그리고 나중에 좀더 자세하게 설명할 부분인 late injection에
위의 식들에서, : equivalent particle diameter. 비 구형 임자의 상당입자직경은 같은 부피를 가지는 구의 직경으로 정의한다. 같은 부피의 구 표면적 실제 입자의 표면적
: sphericity.
= → McCabe, Table 7.1
: porosity 또는 void fraction(공극율)
= → McCabe, Table 7.2
: superficial velocity 또는 empty-tower velocity
process
Fast deposition speed
Cheap process device
1. Partially different thickness
2. Difficult to control the element ratio
3. Hard to deposition the complex material layer
4. Low film quality
3.Material to be evaporated by e-beam
- E-beam dashes against
material
- E-beam transport energy
to the material
- Then evaporation process
is start
controls, 그리고, user interface pulldown menus 등등은 모두 “graphics object”이다. “graphics objects”는 모두 9가지로 분류되는 데, Handle Graphics system에서 복잡한 그림을 만들기 위해 사용되는 성분들이라고 생각하면 좋을 것이다. [그림 3-1]은 이들 “graphics objects”의 종류와 해당하는 예를 보여 주고 있다.
이들
그림과 같은 피토튜브를 하나의 유선에 적용시키면 피토튜브를 이용하여 국소속도(LOCAL VELOCITY)를 얻을 수 있다.
베르누이 식으로부터 공기의 위치에너지는 매우 작은 값이므로 무시하면
하나의 유선에서 움직임이 영이 되는 점을 만들면= 0 m/s 이므로
식은 다음과 같이 간략화 된다.
1. 서 론
스텝모터를 구동 제어하기 위해서는 기본적으로 스텝모터 드라이버가 필요하다. 특히 전용 스텝모터 드라이버의 경우에는 모터를 펄스와 방향 비트로 제어할 수 있다. 스텝모터는 인가된 펄스 개수만큼 움직이고, 펄스의 주파수에 따라서 속도가 결정된다. 이 경우에는 주파수를 조절해야
velocity: implications for tectonic loading
1997 McGee Grant, Conditions for an opening-mode fracture to propagate across an interface, Stanford University McGee Earth Science Foundation
마. RESEARCH EXPERIENCE
1996-present Research Assistant, Fracture Aperture, Spacing, Surface Texture and Propagation Path under Pure Mode-I and Mixed Mode I+III Loading Conditions, Department of GES, Sta
stream velocity, 를 구한다. Free stream velocity 는 Pitot Tube에서 Total pressure와 Static pressure를 측정함으로써 구할 수 있다.
: total pressure, : static pressure
(0°, 4°, 10°에서 높이차 평균값)
18℃에서의 공기의 는 온도에 의해 결정되며, 그 식은 다음과 같다.
Aerodynamics for Engineer, John J. Bertil, Micheal L. Smith,
1. 본 실험에서의 레이놀즈 수를 구하시오.
Reynolds Number (Re)는 다음과 같이 정의된다.
( :밀도, :공기의 속도, :chord length, :viscosity )
는 주어진 실험조건에서 ‘밀도보정식’으로 계산한 공기의 밀도값이며, 는 airfoil에 들어오는 공기의 free stream velocity 이다. L은 airfoil의 길이로 0.110m(주어진값)이