2.2) To toughen thermoplastic polymers
To toughen thermoplastic polymers
↓
“Novel” polyolefin elastomer developed.
Copolymer of ethylene and I-octene
-Faster mixing
Better dispersion
2.2) To toughen thermoplastic polymers
EWF method
Essential work of fracture method
두께가 얇은 소재의 재료물성을 평가하는 방법
simplicity of the experimental process
Thermoplastic)수지(Resin), 금속(Metallic) 등이 사용된다. 근래에 와서 항공기 연료비 절감과 성능 향상을 위해 기체구조물의 높은 강도와 경량화가 요굼됨에 따라, 금속재료보다 가볍고 강도가 높은, 여러 종류의 새로운 복합소재들이 개발되고 있다. 이들 다양한 복합소재는 헬리콥터, 전투기 및 대형 민간
General Process of 3D printing
FDM - Fused Deposition Molding
FDM works on an "additive" principle by laying down material in layers.
The model is produced by extruding small beads of thermoplastic material to form layers as the material hardens immediately after extrusion from the nozzle.
The nozzle can be moved in both horizontal and vertical directions by a numerically controlled mechanism
type of thermoplastic. It should not be confused with the related polymer polyvinyl alcohol, which is called PVA also (PVAc could be considered a technically correct abbreviation for polyvinyl acetate and would aid in avoiding such confusion). Polyvinyl acetate is a component of a widely-used type of glue, referred to variously as wood glue, white glue, carpenter's glue, school glue or PVA glue.
Thermoplastics)
폴리 프로필렌으로 된 얇은 프로펙스 시트를 여러 겹으로 직조하여 만듬
「쌤소나이트」가 유일하게 여행가방에 도입해 특허 받은 공정의 합성물 층으로 이루어진 신소재
100% 재활용 가능
독일의 Propex Fabrics의 등록상표
IT 소식지 일렉트로니스타(Electronista)에 따르면 최대
15.6
Thermoplastics)
폴리 프로필렌으로 된 얇은 프로펙스 시트를 여러 겹으로 직조하여 만듬
「쌤소나이트」가 유일하게 여행가방에 도입해 특허 받은 공정의 합성물 층으로 이루어진 신소재
100% 재활용 가능
독일의 Propex Fabrics의 등록상표
1.'2001년도 기업정보화대상'의 권위와 의의
정보통신부,
2. 가공 소재
* Polyethylenes - 일반적인 상용 수지 (Thermoplastics)
LDPE, HDPE, LLDPE
* 혼합물 (Blends)
-> PP,PA, EVOH 등과 같은 resin들은 Polyethylene 수지와의 혼합물, 또는 다층구조. 막(film)의 단층 막으로 사용 가능하고 이러한 혼합물과 폴리에틸렌 수지는 젤(gel)화 되지 않기 때문에 얇은 층으로 구분될
thermoplastic resin) 또는 열경화성 수지(thermosetting resin)를 채운 뒤 가열 가압하여 성형한다. 그러나 압력이 가해지기 때문에 깨지기 쉽거나 마운팅 온도에서 변형이 되는 시편을 사용 할 수 없다는 단점이 있다. 마운팅에 쓰이는 수지에는 가격이 저렴하고 분말로 되어 쉽게 굳어지는 열경화성의 페놀 수지(
Thermoplastics) 플라스틱과 열경화성(Thermosetting) 플라스틱으로 구분된다.
2. 성상
가열하면 연화되어 유동성이 되고 냉각하면 다시 경화하는 변화를 가역적으로 반복할 수 있는 것이다. 가열하면 처음에는 연화되어 유동성을 나타내게 되나 차차 분자중에 남아있던 미반응기가 서로 반응하여 중합도가