Ⅰ.설계의 이론적 배경
정수 처리 흐름도
취수장(한강) → (전처리) → 약품투입실 → 혼화지 → 응집지 → 침전지 → 여과지 → 염소 투입실 → 정수지 → 배수지 → 가정급수
1.급속혼화지(Rapid Mixing basins)
물속에 넣은 약품과 물이 잘 섞이도록 응집제를 섞는 과정.
정수장에서는 보통 알류미늄계
Rapid Expansion of Supercritical Solution), SAS(Supercritical Anti Solvent) 등이 있다.
1) RESS(Rapid Expansion of Supercritical Solution)
RESS는 입자로 제조할 물질을 초임계유체에 용해시킨 후 미세한 노즐을 통하여 급속히 팽창시킨다<그림3>. 이때, 초임계유체가 gas로 되는 과정에서 용질이 빠른 시간에 과포화 되고 용해되어
Rapid Growth
“The middle-aged mother buys clothes at Zara because they are cheap, while her dauthter aged in the 20s buys Zara because it is fashionable.” -By Devanhshu Dutta-
Among many competitors, Zara’s products and brand image are characterized by high-fashion and low-medium price. (Exhibit 3) Generally, these two characteristics couldn’t be easily achieved at the same time. How
rapidly, so that countries are very attractive market. But that market encountered control already to some local company. So Google has to gain competitive advantage to beat local brand in that market. Second one is economic recession. From 2007, world economy fell in to the deep slackness because of the Subprime mortgage crisis. At this event was joined together with Google’s revenue declined.
rapid curning . Speak kind of liquid asphalt that mix high-test gasoline or naphtha on straight asphalt.
RC method of construction - RC sleeper concrete refers to concrete tie that compression is strong but strengthen reinforcing rod to strengthen seal because is weak to seal.
(1) RC method of construction
Fig 7. RC structure.
If define RC method of construction breifly, because rubing cem
도입기(Introduction Stage)
? 성장속도(수요신장)가 느리다.
? 도입비용(연구개발비, 판촉비 등) 부담으로 인하여 이익이 거의 발생하지 않는다.
성장기(Growth Stage)
? 상품에 대한 수요가 급증하며, 잠재 수요자들이 실제 수요자화 된다.
? 이윤이 현저히 개선된다.
성숙기(Maturity Stage)
? 매출은 증대하지
② Thermal Evaporator
각종 금속(Au, Al, Ti, Cr, In, Ni)과 유전체(SiO2)의 박 막을 기판 위에 증착할 수 있는 장비이다. 진공도는 Torr까지 얻을 수 있다. 박막 증착시에는 박막 두께 측정 센서를 통해 박막의 두께를 확인하며 공정을 진행할 수 있다. 박막은 보통 0.5 Aring/sec ~ 1.0 Aring/sec의 증착 속도로 증착을 하
③ PVD(Physical Vapor Deposition)
PVD는 증착시키려는 물질이 기판에 증착될 때 기체 상태가 고체 상태로 바뀌는 물리적인 변화를 이용한 방법을 말한다. 다른 증착법과는 다르게 저온에서 간단히 박막을 증착할 수 있는데, 다음과 같이 여러 증착법이 있다.
스퍼터링(Sputtering), 전자빔 증착법 (E-beam evapora
4. 실험장비
① E-Beam Evaporator
PVD(Physical vapor deposition)의 한 방법으로 전자빔을 이용하여 박막을 형성하는 것이 E-Beam Evaporator이다. 그림5.는 E-beam장치의 구조도이다. 장치안의 필라멘트에 매우 높은 전압을 가하면 필라멘트에서 에너지를 가진 열전자들이 방출된다. 이 부분을 electron gun이라하고 여