모든 물질은 순환한다는 점에 착안
Recycling을 함으로써 자연에서 생선된 물질을 다시 자연으로 돌려보내며 생태계의 평행을 유지하고 뿐만 아니라 더욱 비옥한 땅을 얻는 효과도 거둘 수 있다.
Selecting an Outdoor Compost Bin
Composting in a Small Outdoor Space
Rodent Proofing
Materials to Compost
Complete L
방법이다.
이후 위의 2가지 세포실험들을 배경으로 하여 동물실험을 시행하였고 5일간 농도별 ethanol을 경구투여한 후 해부하여 조직(간)의 reduced glutathione level을 분석하여 ethanol에 대한 최종적인 독성평가를 마무리 하였다.
Material& Method
세포독성실험
In vitro cytotoxicity test
시약 및 기구
material)에서도 기준의 적용이 가능하다.
(2) 취성재료의 파괴기준 (Fracture criteria for brittle material)
ⅰ. 최대수직응력기준 (Maximum normal stress criterion)
취성재료는 사전의 항복현상이 나타나지 않고 파단으로 갑자기 파괴되는 특성을 갖는다. 가량 단축 인장응력을 받는 경우, 그 부재가 파손되는 수직
An organic light emitting diode (OLED) is a solid state device like the LED but composed of several layers in which the emissive electroluminescent layer is a film of organic compounds which emit light in response to an electric current.
Function of each part
Cathode : injecting electron composed of metal
Anode : injecting hole composed of transparent ITO
Emissive polymer : reco
원추형 tip(spindt type cathode)
-금속 tip
-실리콘 tip
테두리형 emitter
잎사귀형(leaf type)
빗형(comb type)
별형(star type)
저항층(resistive layer)을 갖는 tip형 emitter
평면형 emitter-MIM구조
-CNT(탄소나노튜브)
형광이란, 물질의 내부에 있는 전자가 외부로부터 에너지
Keff, Km, Kp : the effective thermal conductivities of the composite,
Metal matrix, Particles
φp : the volume fraction of reinforcements
a : the diameter of the reinforcement
- hc : the boundary conductivity.
Advantage
The air travels across the short
length of the fins laterally, rather than longitudinally down
the long length.
Focused on placing
B. Solution-Liquid-Solid Growth of Indium Phosphide Fibers from Organometallic Precursors: Elucidation of Molecular and Nonmolecular Components of the Pathway
Solution-phase organometallic syntheses of semiconductors are used for the growth of high-quality quantum dots,1-3 and are potentially useful for the deposition of semiconductor materials on thermally sensitive substrates such as polymers
Significantly higher surface area and much narrower pore size distribution in the mesopore region
A large amount of amine-type CO2 capturing agent into its mesopores in a well dispersed manner
Synthesis of MA
PEI impregnation on MA
Amine grafting on MCM-41
Characterization of the materials prepared
CO2 adsorption-desorption measurement
Al(i-PrO)3 (41.68g)+ Alcohol solvent
② Thermal Evaporator
각종 금속(Au, Al, Ti, Cr, In, Ni)과 유전체(SiO2)의 박 막을 기판 위에 증착할 수 있는 장비이다. 진공도는 Torr까지 얻을 수 있다. 박막 증착시에는 박막 두께 측정 센서를 통해 박막의 두께를 확인하며 공정을 진행할 수 있다. 박막은 보통 0.5 Aring/sec ~ 1.0 Aring/sec의 증착 속도로 증착을 하
metal을 올리는 것이다. 이러한 공정의 종류와 방법은 주로 화학적이냐 물리적이냐에 따라 크게 두 카테고리로 나뉜다.
그림. 4 박막 공정의 종류
1) Chemical Deposition
유체(액체, 기체) precursor(씌우고자 하는 층이 될 잠재 물질)는 고체 표면에서 화학적 변화를 일으켜, 고체 층을 만든다. 유체가