3. Experiment & Procedure
3-1 Reagent
- Water, 수돗물(15℃)
3-2 Apparatus
- single media deep bed filter column
- manometer
- mass cylinder
- thermometer
- stopwatch
3-3 Procedure
1) 실험에 사용할 여재(모래)를 준비한다.(세척 및 이물질 분리)
2) 모래를 건조시킨 후, 체 거름을 이용하여 입자 크기를 잰다.
3) 공극률(P
1. Justifications of the proposed schemes -the structural problem& the chemical injection locations
2. Design impeller and tank type affecting energy efficiency, cost, flocculation size. Design Diffuser Walls and Baffles used for Minimizing Short Circuiting
3. Design launder type, structure, sludge and scum model
Filtration의 세번째 key concept 이유: (to promote readily biodegradabl
1. 여과 (filtration)
여과는 유체를 여과매체(filtering medium)에 통과시켜서 세공보다 큰 입자가 막위에 퇴적되게 함으로써 유체로부터 고체입자를 분리하는 것이다. 유체는 액체나 기체일 수 있으며, 여과 대상은 유체나 고체 또는 둘 다가 될 수 있다. 여과속도를 개선하기 위하여 가열 또는 재결정화의
2000 B.C - The first recorded (The Susruta Samhita, Sanskrit writing) water purification began with the Egyptians. It is said that impure water should be boiled over a fire, heated in the sun, have a hot iron dipped into it or purified by filtration through sand and course gravel.
A major step in the development of desalination technologies came in the 1940s during World War II when various m
FILTRATION)
: 공기중이나 수용액 중에 있는 ATODANF을 열이나 화학약품을 사용하지 않고 여과기를 이용하여 세균을 제거하는 방법으로, 가열 살균을 할 수 없는 의약품, 혈청, 백신, 또는 세균 배양기 등에 이용하거나 수술실이나 백혈병 환자를 위한 무균병실 등 무균공기를 만들고자 할 때도 이
위해서 Filtration이 최종적으로 진행된다. 과다한 전기에너지의 누출을 막기 위해 바이메탈이라는 오래된 방법도 이용된다. 그리고 여러 고분자 화합물이 구성 물질로 사용된다. 이렇게 다양한 물리적 원리를 이용하여 제품을 완전하게 하려는 시도가 보인다. 그러나 아직 커피메이커는 많이 부
⇒ 재결정이란 결정을 용융(melting)시켜 결정구조를 완전히 분열시킨 후 다시 새로운 결정 을 형성하게 함으로써 불순물(impurity)을 용융액(melt)이나 용액속에 남아 있게 하여 순도(purity)를 높이는 방법이다. 이러한 재결정법의 기본적 원리는 온도에 따른 용해도(solubility)의 차를 이용하는 것이다.
냉간
2.원리
이 방법은 다른 방법과는 달리 세균을 확실하고 간편하게 농축하는 방법으로 균 농도가 낮은 물 시료 등에서 자주 사용된다. 여기에 표시한 것은 한천 배지와 액체 배지를 사용하여 필터 위에서 집락이 생기도록 한 것이지만 집균한 필터를 액체 배지가 담긴 시험관에 옮기고 최확수법을 이용
Ⅲ Flocculation
The purpose of flocculation is to uniformly mix coagulated water to produce either settleable or filterable floc and accelerate the rate of particle collisions, causing the agglomeration of electrolytically destabilized colloidal particles into settleable and filterable sizes.
Considerations of flocculation are:
1. Baffling to prevent of flow short-circuiting
2. Tapered