instrument composition
-Electric furnace
Temperature range:
25°C~1500°C
Heat speed :
Maximum 200°C/min
*Separate Electric furnace and other system like Electronic scale
-Because Electric furnace temperature is very high
so we need to protect other system.
instrument composition
-Electric furnace
Temperature range:
25°C~1500°C
Heat speed :
Maximum 200°C/min
*N
interface on the substrate and shifting will not exist any more when it is located on the interface between metal and interface. Mobile charges has the same effect. But it makes the curve shift toward applied voltage because the movement of charges is determined by applied voltage(-,+). It is known that mobile charges are generated when dielectric material has the impurities such as Na ion.
The
1. Pump에서의 Cavitation (공동현상) 에 대하여 기술하고 이로 생길 수 있는 문제점과 그 방지책에 대해 논하시오
- Cavitation이란
유체가 넓은 유로에서 좁을 곳으로 고속 유입하거나 벽면의 요철, 만곡부 등으로 흐름이 직선적이지 못할 때 유체는 저압이 되고 포화증기압보다 낮아지면 기화되어 기포가
Ⅰ. 컴퓨터 수행지원시스템 설계
컴퓨터 수행지원 시스템은 학습 자체가 목적인 CBT와는 달리 수행의 개선을 위해 학습과 도움을 제공하는 통합 시스템이기 때문에 보다 복합적이고 새로운 설계가 필요하다. 완전한 시스템을 위해 고려되어야 할 설계 원리들이 매우 다양할 수 있지만 여기에서는 컴퓨
4. Dopant Barrier <불순물 장벽>
- 산화층이 실리콘 표면에서 성장하면 불순물 물질이 wafer로 들어가는 곳에 창을 생성시키기
위해서 Mask 개방으로 SiO2를 식각, 이때 산화물은 dopant의 확산으로부터
silicon의 표면을 보호.
- 선택적인 dopant의 도핑가능
5. 금속층 사이의 유전체
9. n-type Semiconductor에서 온도에 따른 Carrier 농도 변화
매우 낮은 온도에서는 intrinsic EHP가 거의 존재하지 않는다. 온도가 증가함에 따라 도너의 전자들이 Conduct band로 옮겨지고 약 100K에서 모든 도너 원자가 이온화되는 과정이 발생한다. 이후 ni가 Nd와 비등해 질 때까지(intrinsic carrier 농도가 도너 농도와
3D printing
3D printing or additive manufacturing (AM) refers to any of the various processes for printing a three-dimensional object. Primarily additive processes are used, in which successive layers of material are laid down under computer control. These objects can be of almost any shape or geometry, and are produced from a 3D model or other electronic data source.
Basic principles
If the